Jst WC-160 Hand Crimping Tool for 3.96mm Pitch VH Series 102332 Data Sheet
Product codes
102332
VH
CONNECTOR
3.96mm pitch/Disconnectable Crimp style connectors
5
3
4
6
2
1
JST
6
Locking header
Side entry type with PCB stabilizer
φ1.65
0
3.96
±0.05
＋0.1
10.5
16.5
φ1.65
0
3.96
±0.05
＋0.1
21.0
10.5
19.0
Shrouded header
*7.2
min
20.5
10.5
8.0
φ1.65
0
3.96
±0.05
＋0.1
*7.2
min
*11.0 max. when used with the VR connector receptacle.
3.96
±0.05
±0.05
±0.05
1.5
φ1.65
0
＋0.1
3.4
φ1.4
0
＋0.1
Circuit No.1
10.5
16.5
This small, field-proven connector for
printed circuit boards is reliable and has a
large current carrying capacity. It can be
used with a wide variety of signal, power
supply, and output circuits that appear in
consumer electronic products.
printed circuit boards is reliable and has a
large current carrying capacity. It can be
used with a wide variety of signal, power
supply, and output circuits that appear in
consumer electronic products.
• Proven box contact
• Compact connector with a large capacity
• Secure contact and mounting
• Compact connector with a large capacity
• Secure contact and mounting
Specifications –––––––––––––––––––
• Current rating:
10A AC, DC (AWG #16)
• Voltage rating:
250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m
Ω max.
After environmental testing/20m
Ω max.
• Insulation resistance:
1,000M
Ω min.
• Withstanding voltage:
1,500V AC/minute
• Applicable wire: AWG #22 to #16
• Applicable PC board thickness: 1.6mm
• Applicable PC board thickness: 1.6mm
Note:
Do not branch in parallel current which exceeds the rated current. If branched in
parallel, current imbalance or other problems may develop. If it is absolutely
necessary to branch such a large current in parallel, be sure to use contacts
made of phosphor bronze. Design the circuits without causing imbalance and
provide an extra margin for each circuit.
Do not branch in parallel current which exceeds the rated current. If branched in
parallel, current imbalance or other problems may develop. If it is absolutely
necessary to branch such a large current in parallel, be sure to use contacts
made of phosphor bronze. Design the circuits without causing imbalance and
provide an extra margin for each circuit.
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards–––––––––––––––––––––––
0
Recognized E60389
1
Certified LR20812
2
R75122
Locking header
Side entry type
Locking header
Top entry type
Note: 1. Tolerances are non-cumulative:
±0.05mm for all centers.
2. Please consider the pattern layout design in case of applying the large current.
3. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
3. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
PC board layout (viewed from soldering side) and Assembly layout
64