Everlight Opto N/A PT 15-21B/TR8 N/A Everlight O PT15-21B/TR8 Data Sheet

 

  Everlight Electronics Co., Ltd.           http:\\www.everlight.com          Rev 1.1         Page: 7 of 10 

  Device No：DTT-015-031              Prepared date：04-28-2003        Prepared by：Jaine Tsai 

 

  Please refer to the following figure 

  Basic spec is  ≦5 sec when 260℃. If temperature is higher , time should be shorter   

 (+10℃              -1sec ).Power dissipation of Iron should be smaller than 15W ,and 

  temperature should be controllable. Surface temperature of the device should be 

 under 230℃. 

 

  1.Customer must finish rework within 5 sec under 245℃ 

  2.The head of iron can not touch copper foil. 

  3.Twin-head type is preferred.