MEAN WELL GC220A24-R7B Lead Acid Battery Charger, For V Batteries GC220A24-R7B Data Sheet

Product codes
GC220A24-R7B
Page of 2
SPECIFICATION
ORDER NO.
DC VOLTAGE (Typ.)
SAFETY MODEL NO.
RATED POWER
OUTPUT
VOLTAGE RANGE
Note.3
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT
INPUT
ENVIRONMENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
SAFETY STANDARDS
SAFETY &
EMC
(Note. 5)
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
PROTECTION
GC220A24-
GC220A48-
GC220A24
GC220A48
GC220A12-
ORDER NO.
OUTPUT CONNECTOR
SAFETY
GC220Axx-R7B (standard model)
4pin power din
TUV / CB / FCC / CE
GC220Axx-AD1 (optional model)
=R7B,AD1
GC220Axx-
xx=12,24,48 ;
Anderson connector
UL / TUV / CB / FCC / CE
GC220A12
27.2V
54.4V
13.6V
LED INDICATOR
Charging(CC) : RED
Floating charging(CV) : GREEN
90 ~ 264VAC
127 ~ 370VDC
47 ~ 63Hz
PF>0.90 / 230VAC
PF>0.98 / 115VAC at full load
92.5%
93%
89%
4A / 115VAC
2A / 230VAC
120A / 230VAC
1.5mA / 240VAC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P: 3KVAC
I/P-O/P
/ 25
/ 70% RH
:100M Ohms / 500VDC
190Khrs min. MIL-HDBK-217F(25
)
-30 ~ +60
(Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-40 ~ +85
, 10 ~ 95% RH
0.03% /
(0~50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
210*85*46mm (L*W*H)
1.1Kg; 12pcs/14.2Kg/0.73CUFT(GC220Axx-R7B)
1.2Kg; 12pcs/15.4Kg/1CUFT(GC220Axx-AD1)
CONNECTOR
PLUG
CABLE
See page 2
ther type available by customer requested
; O
See page 2
ther type available by customer requested
; O
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25
of ambient temperature.
2. This is MeanWell's suggested range, please consult your battery manufacturer for their suggestions about maximum charging current limitation.
3. Derating may be needed under low input voltage. Please check the derating curve for more details.
4. Constant current operation region is within 50~100% rated output voltage.
5. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that whole system complies with the
EMC directives.
Features :
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
OVERLOAD
Note.4
OVER VOLTAGE
90 ~ 110% rated output power
Protection type : Constant current limiting recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
217.6W
217.6W
183.6W
Protection type : Shut down o/p voltage, re-power on to recover
UL1012 (for GC220Axx-AD1 only), TUV EN60950-1 approved
Compliance to EN55022 class B, FCC PART 15 class B / CISPR22 class B, EN61000-3-2,3
2 stage charging characteristic
Universal AC input / Full range
No load power consumption<1W
3 pole AC inlet IEC320-C14
Class power ( with earth pin)
Protections: Short circuit / Overload / Over voltage / Over temperature
C
Fully enclosed plastic case
2 color LED indicator for charging status
Approvals: TUV / UL / CB / FCC / CE
2 years warranty
Built-in active PFC function, PF>0.90
ooling by free air convection
OVER TEMPERATURE
95
10
(TSW1) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
G C 2 2 0
s e r i e s
220W Single Output Battery Charger
RECOMMENDED BATTERY
CAPACITY
Note.2
CURRENT (Typ.)
CONTINUOS OUTPUT
40 ~ 125Ah
8A
20 ~ 65Ah
4A
80 ~ 200Ah
13.5A
SHORT CIRCUIT
File Name:GC220-SPEC 2011-08-09
( for GC220Axx-AD1 only)
TUV
Rheinland
Product Safety
geprUfre
Sicherheit
EMC IMMUNITY
EMC EMISSION