Zettler Electronics AZSR126-1AE-12D PCB Mount Relay AZSR126-1AE-12D Data Sheet
Product codes
AZSR126-1AE-12D
AZSR126
26 AMP MINIATURE
POWER RELAY
FEATURES
Arrangement
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 8587 VA
Max. switched current: 31 A
Max. switched voltage: 277 VAC
Rated Load
UL
VDE
26 A at 277 VAC, resistive, 75°C, 50k cycles
26 A at 250 VAC, resistive, 75°C, 50k cycles
22 A at 277 VAC, resistive, 85°C, 100k cycles
22 A at 250 VAC, resistive, 85°C, 100k cycles
31 A at 277 VAC, cos phi 0.8, 85°C, 50k cycles *
31 A at 250 VAC, cos phi 0.8, 85°C, 50k cycles *
26 A at 277 VAC, resistive, 85°C, 50k cycles
26 A at 250 VAC, resistive, 85°C, 50k cycles
22 A at 277 VAC, resistive, 85°C, 100k cycles
22 A at 250 VAC, resistive, 85°C, 100k cycles
*
duty factor: 0.1 seconds on / 10 seconds off
Material
Silver tin oxide
Resistance
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10
6
3 x 10
4
at 26 A 250 VAC Res.
Operate Time
20 ms max. at nominal coil voltage
Release Time
10 ms max. at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
4500 Vrms coil to contact
2500 Vrms between open contacts
Insulation Resistance
1000 megaohms min. at 20°C,
500 VDC 50% RH
Holding Voltage
Greater than 35% of nominal coil voltage
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
at nominal coil voltage
-40°C (-40°F) to 60°C (140°F)
at max. 80% of nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
1.5 mm DA at 10-55 Hz
Shock
20 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
25 grams
GENERAL DATA
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
690 mW
2.0 W at 20°C (68°F) ambient
90°C (194°F) at nominal coil voltage
Temperature
Max. 155°C (311°F)
COIL
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
NOTES
• Dielectric strength 4500 Vrms
• 31 Amp switching
• Contact gap > 1.5 mm
• Clearance / creepage > 6.4 / 7.5 mm
• UL, CUR 44211
• VDE pending
8
/6/13
(Pending)
Distributed by Conrad Electronic SE, Hirschau, Germany