Hsb Industrieelektronik 011220 Time Delay Relay, Timer, SPDT-CO 24/230 Vac 011220 User Manual

  

timer
Multifunction time relay ZMRF

for remote potentiometer and with galvanic isolation inside
sereie 17,5mm with 1 o. 2 change over 

                                              

The ZMRF Multi-function timer offers 7 selectable timing 
functions and 8 different timing intervals in one unit.  The 
function and timing intervals can be adjusted with DIP 
switches on the front panel of the relay.  The multi-function 
timer can operate on either AC or DC voltage using two 
separate connections.  To connect to 230V AC the terminals 
A1 and A2 are used.  For a connection with 24V DC use the 
terminals A3 and A2.  The green LED indicates the connection 
to the power supply.  Timing commences with the connection 
of the power supply or with an external control contact 
connected to the terminals B1 and B2.

Other timing ranges and voltages available upon request.

Snap-on mounting using a standard DIN rail EN 50022. The 
unit is designed to allow side-by-side mounting, with an 
ambient temperature of < 60°C. 

Time control for electric isolated applikations.

* For external start contact.

6

5

4

3

2

1

 Zeiten

 Funktionen 

3

3

3

3

3

3

2

2

2

2

2

2

delay on operate

delay on release*

pulse on operate

pulse on releasae*

flashing start with off

flashing start with on

1

1

1

1

1

1

6

5

6

5

6

5

6

5

6

5

6

5

4

4

4

4

4

4

0,05   -     1s

  0,5   -        10s

     3   -        60s

        15   -      300s

  0,5   -   10 min.

     3   -   60 min.

         15   - 300 min.

  0,5   -      10 h

3

2

1

3

2

1

watchdog*

6

5

4

Select the wished time range on the dip switch on the front 
panel. Adjust the wished time with the internal or external (10k) 
potentiometer between the selected time range.
If an external potentiometer is connected the internal 
potentiometer is automatic electronic deactivated, so that 
the position from the internal potentiometer has no 
influence to the time value.

Delay-on operate: Timing begins with the connection of the 
power supply.  After the set time has elapsed, the output relay 
is energized.   The yellow LED indicates the working position of 
the output contact.  If the supply voltage is disconnected, the 
output relay resets and the elapsed time is cancelled.  If the 
supply voltage is disconnected during the reset time, the timer 
returns to its original state.  

H S B

Industrieelektronik

t

t

t

time

A1 (A3) / A2

Kontakt   15,25

16,26

Kontakt   15,25

18,28

15

A1

A2

16 18

25

26 28

 Info@hsb-electronics.de
 www.hsb-electronics.de

HSB Industrieelektronik 
Hans-Boerdlein-Str.10
97723 Reith / Germany

Tel.: +49 9736 / 75759-0
Fax: +49 9736 / 75759-20