Zettler Electronics AZ7705T-1A-9DEF PCB Mount Relay AZ7705T-1A-9DEF Data Sheet
Product codes
AZ7705T-1A-9DEF
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 5 A 240 VAC Res.
Operate Time (typical)
15 ms at nominal coil voltage
Release Time (typical)
4 ms at nominal coil voltage
(with no coil suppression)
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 750 Vrms between open contacts
Surge Voltage
Coil to contact
Coil to contact
10,000V (at 1.2x50 µ s)
Insulation
1000 megohms min. at 20°C
Resistance
500 VDC 50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-30°C (-22°F) to 60°C (140°F), standard
-30°C (-22°F) to 80°C (176°F), sensitive
-30°C (-22°F) to 85°C (185°F), Type F, standard
-30°C (-22°F) to 105°C (221°F), Type F, sensitive
-30°C (-22°F) to 80°C (176°F), sensitive
-30°C (-22°F) to 85°C (185°F), Type F, standard
-30°C (-22°F) to 105°C (221°F), Type F, sensitive
Storage
-30°C (-22°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
9 grams
CONTACTS
Arrangement
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 150 W (SPST-NO) standard
1250 VA (SPST-NO) standard
Max. switched current: 5 A AC SPST-NO standard
5 A DC SPST-NO standard
3 A AC/DC SPST-NO sensitive
3 A AC/DC SPST-NO sensitive
Max. switched voltage: 30* VDC or 265 VAC
*
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
Form A
UL, CUR
5 A at 250 VAC, Res., Standard, Ag, 100k cycles, 85°C
5 A at 30 VDC, Res., Standard, Ag, 100k cycles, 85°C
3 A at 250 VAC, Res., Sensitive, Ag, 100k cycles, 85°C
3 A at 30 VDC, Res., Sensitive, Ag, 100k cycles, 85°C
1/6 HP at 125 / 250 VAC, 100k cycles, 85°C
5 A at 30 VDC, Res., Standard, Ag, 100k cycles, 85°C
3 A at 250 VAC, Res., Sensitive, Ag, 100k cycles, 85°C
3 A at 30 VDC, Res., Sensitive, Ag, 100k cycles, 85°C
1/6 HP at 125 / 250 VAC, 100k cycles, 85°C
‘T’ High Current Version: Standard
10 A at 250 VAC, Res., AgCdO, 100k cycles, 85°C
10 A at 30 VDC, Res., AgCdO, 100k cycles, 85°C
1/6 HP at 125 / 250 VAC, 100k cycles, 85°C
10 A at 250 VAC, Res., AgCdO, 100k cycles, 85°C
10 A at 30 VDC, Res., AgCdO, 100k cycles, 85°C
1/6 HP at 125 / 250 VAC, 100k cycles, 85°C
‘T’ High Current Version: Sensitive
8 A at 250 VAC, Res., AgCdO, 100k cycles, 85°C
8A at 30 VDC, Res., AgCdO, 100k cycles, 85°C
8 A at 250 VAC, Res., AgCdO, 100k cycles, 85°C
8A at 30 VDC, Res., AgCdO, 100k cycles, 85°C
Material
Silver Alloy, Silver Cadmium Oxide
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
(24 V, 1 A voltage drop method)
AZ
6/27/12
AZ7705
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage
221 mW standard
(typical)
113 mW sensitive
Max. Continuous
761 mW at 20°C (68°F) ambient
Dissipation
Temperature Rise
41°C (74°F) at nominal coil voltage, standard
30°C (40°F) at nominal coil voltage, sensitive
30°C (40°F) at nominal coil voltage, sensitive
Temperature
Max. 115°C (239°F)
SUBMINIATURE
POWER RELAY
POWER RELAY
FEATURES
• Small footprint
• 4 kV dielectric strength, 10 kV surge
• Epoxy sealed available
• Type ‘F’ 155°C wire standard
• 5 Amp switching
• High current 10A version available
• UL, CUR file E44211
• 4 kV dielectric strength, 10 kV surge
• Epoxy sealed available
• Type ‘F’ 155°C wire standard
• 5 Amp switching
• High current 10A version available
• UL, CUR file E44211