Crydom DR24D06R SeriesOne DIN Rail Mount Solid State Relay DR24D06R Data Sheet
Product codes
DR24D06R
Other Crydom products and competitive part number cross-reference available at:
www.crydom.com
www.crydom.com
SeriesOne DR Dual Channel
AC Output
Two independent 6 Amp channels
DIN rail mount 18 mm wide package
4-32 VDC control input
24 to 600 VAC operating voltage ratings
IP20 housing with unique integrated heat sink design (Patent Pending)
AC Output versions with Zero Voltage Turn-On for resistive loads and Random Turn-On for inductive loads
High power density for multiple units
UL & cUL approved including General Purpose and Motor Controller ratings
CE & RoHS compliant
DIN rail mount 18 mm wide package
4-32 VDC control input
24 to 600 VAC operating voltage ratings
IP20 housing with unique integrated heat sink design (Patent Pending)
AC Output versions with Zero Voltage Turn-On for resistive loads and Random Turn-On for inductive loads
High power density for multiple units
UL & cUL approved including General Purpose and Motor Controller ratings
CE & RoHS compliant
OUTPUT SPECIFICATIONS
DRD24D06
DRD48D06
Operating Voltage (47-63Hz) [VAC]
24-280
48-600
General Use Current Rating (Resistive Load)
6 Arms per channel
6 Arms per channel
Minimum Load Current [Arms]
0.15
0.15
MaximumOff-State Leakage Current @ Rated Voltage [mArms]
0.1
0.2
Maximum Surge Current [Apk] @ 50 Hz (Duration in ms)
715 (20)
715 (20)
Maximum Surge Current [Apk] @ 60 Hz (Duration in ms)
750 (16.6)
750 (16.6)
Transient Overvoltage [Vpk]
600
1200
Maximum On-State Voltage Drop @ Rated Current [Vpk]
1.3
1.3
Maximum I²t for Fusing (10/8.3 ms) [A²sec]
2560/2330
2560/2330
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec]
500
500
Maximum Turn-On Time
1/2 cycle
1/2 cycle
Maximum Turn-Off Time
1/2 cycle
1/2 cycle
UL Motor Controller Ratings @ 240 VAC [HP]
1/6
1/6
Power Factor (Minimum) with Maximum Load
0.5
0.5
DRDxxD06
DRDxxD06
Control Voltage Range [VDC]
4-32
Min. Turn-On Voltage [VDC]
4
Min. Turn-Off Voltage [VDC]
1
Yes
Typical Input Current
10 mA @ 24 VDC
INPUT SPECIFICATIONS
Reverse Polarity Protection
Weight (typical) [oz] (gr)
Housing Material
Input Terminal Wire Capacity
10
-30 to 80
-30 to 125
4.4 (0.5) / 7.0 (0.8)
3.17 (90)
UL 94 V0 Self-extinguishing
22 AWG minimum, 16 AWG maximum
Output Terminal Wire Capacity
22 AWG minimum, 14 AWG x 2 or 12AWG x1 (standed/solid) maximum
2500
2500
10
9
GENERAL SPECIFICATIONS
Dielectric Strength, Input to Output (50/60Hz) [Vrms]
Dielectric Strength, Input-Output to Case (50/60Hz) [Vrms]
Minimum Insulation Resistance (@ 500 VDC) [Ohm]
Maximum Capacitance, Input/Output [pF]
Ambient Operating Temperature Range [°C]
Ambient Storage Temperature Range [°C]
Maximum Recommended Terminal Screw Torque Input/Output [in/lbs] (Nm)
All parameters at 25°C unless otherwise specified.
Minimum spacing required between devices (see derating curves).
Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1.
Turn-On time is 0.1 ms for Random-type DC Control Models.
Input circuit incorporates active current limitation.
Minimum spacing required between devices (see derating curves).
Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1.
Turn-On time is 0.1 ms for Random-type DC Control Models.
Input circuit incorporates active current limitation.
GENERAL NOTES
(A)
(B)
(C)
(D)
(F)
(A)
(B)
(C)
(D)
(F)
(A)
(A)
06
24
D
DRD
Series
Max Output Voltage
24:
48:
48:
Control Voltage
D:
Output Current
06:
24 to 280 VAC
48 to 600 VAC
48 to 600 VAC
4 to 32 VDC
6 Amps
Options
Blank: Zero Voltage Turn-On
R: Random Turn-On
R: Random Turn-On
Required for valid part number
For options only and not required
for valid part number
for valid part number
R
Part Number Nomenclature
ID Marker Strips
CNLB, CNLN, CNL2
Blank Strips
Part no.: CNLB
Packages of 10 plastic strips comprising
10 individual markers which can be
placed for easy identification during
the use of multiple units.
10 individual markers which can be
placed for easy identification during
the use of multiple units.
Numbered 1 to 10 Strips
Part no.: CNLN
Numbered 11 to 20 Strips
Part no.: CNL2