Lappkabel 0034176, Cable , Grey Sheath 0034176 Data Sheet
Product codes
0034176
U.I. Lapp
GmbH
DATA SHEET
J-2Y(ST)Y…ST III BD
DB0034171
valid from: 06.08.2013
Originator:
ALTE / PCM
approved:
PESA / PDC
Document:
DB0034171EN
page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
PD 0019/2.2_11.10EN
Application
J-2Y(ST)Y ...ST III BD is a indoor telephone cable for data transmission rates of up to 16 MBit/s.
It is for example used for connecting EDP system units or for circuits for airfield lighting, ISDN private branch exchanges,
operating data acquisition, operating data entry, access control and time recording systems, industrial electronics, all
designed for maximum security and speed.
The cable can be used in dry and wet interiors for fixed installation on and under plaster.
It is for example used for connecting EDP system units or for circuits for airfield lighting, ISDN private branch exchanges,
operating data acquisition, operating data entry, access control and time recording systems, industrial electronics, all
designed for maximum security and speed.
The cable can be used in dry and wet interiors for fixed installation on and under plaster.
Design
Conductor
solid bare copper conductor
Insulation
polyethylene
Core identification code
according to DIN 0815
Stranding
cores twisted to star quads,
star quads are stranded in bundles,
bundles are stranded in layers
wrapping with foil on the outer layer
star quads are stranded in bundles,
bundles are stranded in layers
wrapping with foil on the outer layer
Screen
Static screening made of aluminium-laminated plastic foil with copper drain wire
Outer sheath
PVC, colour: pebble grey (RAL 7032)
Design based on standard VDE 0815
Electrical properties at 20°C
Conductor loop resistance
0.6 mm
130.0 Ω/km
max.
Specific insulation resistance
> 5 G Ω x km
Mutual capacitance
max. 52 nF/km
(at 800 Hz)
(at 800 Hz)
Short-range crosstalk attenuation
(NEXT)
(NEXT)
2-pair: 45 dB
> 2-pair: 20 dB
(4-16 MHz)
> 2-pair: 20 dB
(4-16 MHz)
Characteristic impedance
100 Ohm ± 5%
Peak working voltage
300 V (not for power applications)
Test voltage
C/C: 500 V
C/S: 2000 V
C/S: 2000 V
Mechanical and thermal properties
Minimum bending radius
Fixed installation: 10 x cable Ø
Temperature range
Fixed installation: -30°C up to +70°C
Occasionally flexing: -5°C up to +50°C
Occasionally flexing: -5°C up to +50°C
Flammability
Flame retardant acc. to IEC 60332-1-2
EU directive
This cable is conform to the EU-Directive 2011/65/EU
(RoHS, Restriction of the use of certain hazardous substances).
(RoHS, Restriction of the use of certain hazardous substances).