Perfectpro MyTUBE MYTUBE W User Manual

4.  Adjust the rubber antenna to get the best reception. If the radio is tuned to a station of sufficient signal strength with RDS  

information present, the display may change to show the station name.

5.  When the waveband end is reached, the radio will recommence tuning from the opposite waveband end.

RDS (Radio Data System) is an information system which inaudible digital information is transmitted in addition to the normal FM

radio program. When the radio is receiving a RDS station and the reception strength is sufficient, the station name will appear in the

display. It may take some time before the RDS information is available.

 

When you are listening to a FM station with RDS system, repeatedly press the SELECT/INFO button to cycle through the i 

nformation. This will only function if the reception level is sufficient and clear.

a. Station name (PS)

Displays the name of station being listened to.

b. Program type (PTY)

Displays the type of station being listened to, e.g. Pop, Classic, News, etc.

c. Radio text (RT)

Displays the message about the station being listened to as ticker text.

d. Time & date

Displays the current time (24 hour clock) and date.

e. Signal strength (SGLV)

Displays signal strength for the station being listened to.

There are 10 memory presets in the radio.

1.  Press the On/Off button to turn on the radio.

2.  Press the SOURCE button to switch to “FM RADIO” mode.

3.  Tune to the required station.

4.  Press the MENU button until “MEM STORE” is displayed. 

5.  Press the Tuning Down or Tuning Up button to select the desired preset number (from P1 to P10).

6.  Press the SELECT/INFO button to confirm.

7.  Repeat step 3 and 4 for the remaining presets.

8.  Stations stored in the preset memories can be over-written by following the above procedure.

9.  The “MEM STORE” function stays active for about 4 seconds. If no action is taken the radio will return to showing the RDS

information of the selected station.

G B