Thecus 1U4500R Leaflet

Once the hardware is installed, physically connected to your network, and 
powered on, you can configure the 1U4500 so that it is accessible to your 

network users. There are two ways to set up your 1U4500: using the Thecus 
Setup Wizard or the LCD display. Follow the steps below for initial software 

setup. 

The handy Thecus Setup Wizard makes configuring 1U4500 a snap. To configure 
the 1U4500 using the Setup Wizard, perform the following steps: 

 

1.  Insert the installation CD into your CD-ROM drive (the host PC must be 

connected to the network). 

 

2.  The Setup Wizard should launch automatically. If not, please browse your 

CD-ROM drive and double click on Setup.exe. 

 

 
 

 

For MAC OS X users, double click on Thecus Setup 

Wizard 1.1.6.dmg 

 
 

3.  The Setup Wizard will start and automatically detect all Thecus storage 

devices on your network. If none are found, please check your connection 

and refer to 

 for assistance. 

 

 

 

4.  Select the 1U4500 that you like to configure. 

 

5.  Login with the administrator account and password. The default account 

and password are both “admin”.  

 

 

 
 

13