Akasa AK-NBC-28BK Leaflet

Page of 2
Akasa cooling pad 39.1 cm (15.4") 
Version 10/10
Item no. 97 51 29
“Libero”
Item no. 97 51 30
“Orion”
Intended Use
1. 
This notebook cooling pad is designed to help maximize notebook performance by keeping it cool. Two built-in 
fans pass cool air over the notebook to help prevent overheating. It is designed for 39.1 cm (15.4”) and smaller 
notebooks.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval 
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to 
associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly 
and keep them for further reference.
Delivery Content 
2. 
Cooling pad
• 
DC / USB cable
• 
Operating instructions
• 
Safety instructions
3. 
We  do  not  assume  liability  for  resulting  damages  to  property  or  personal  injury  if  the 
product has been abused in any way or damaged by improper use or failure to observe 
these operating instructions. The warranty/ guarantee will then expire!
The  icon  with  exclamation  mark  indicates  important  information  in  the  operating 
instructions. Carefully read the whole operating instructions before operating the device, 
otherwise there is risk of danger.
Persons / Product
The product is not a toy and should be kept out of reach of children!
• 
When used in conjunction with other devices, observe the operating instructions and safety notices of  
• 
connected devices.
The product must not be subjected to heavy mechanical stress.
• 
The  product  must  not  be  exposed  it  to  extreme  temperatures,  direct  sunlight,  intense  vibration,  or 
• 
dampness.
Never reach into the rotating fan as this poses a serious risk of injury! Do not interfere with the proper 
• 
functioning of the fan (for example, by inserting external objects).
Miscellaneous
Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop.
• 
If any questions arise that are not answered in this operating instruction, contact our Technical Advisory 
• 
Service or other experts.
Operation
4. 
Place your notebook on top of the cooling pad. 
1. 
Connect the DC plug of the cable to the cooling pad. Connect the USB plug of the cable to an available 
2. 
USB port on your notebook. 
Press the ON/OFF switch at the side to turn the fans on or off. 
3. 
The fans will operate to cool down the notebook.
4. 
Disposal
5. 
In order to preserve, protect and improve the quality of environment, protect human health and 
utilise natural resources prudently and rationally, the user should return unserviceable product to 
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as 
municipal waste.
Technical data
6. 
Operating voltage:
5 V/DC
Current consumption:
0.3 A
Fan size:
70 x 70 x 15 mm
Fan speed:
1500 rpm ±15 % (Item no. 97 51 29), 
1200 rpm ±15 % (Item no. 97 51 30)
Noise level:
18.8 dB(A)
Operating temperature:
-10 to +70 ºC
Dimensions (W x H x D): 334 x 36 x 275 mm (Item no. 97 51 29), 
350 x 45 x 284 mm (Item no. 97 51 30)
Weight:
785 g (Item no. 97 51 29), 
850 g (Item no. 97 51 30)
Akasa Cooling-Pad 39,1 cm (15,4")
Version 10/10
Best.-Nr. 97 51 29
„Libero“
Best.-Nr. 97 51 30
„Orion“
Bestimmungsgemäße Verwendung
1. 
Dieses Notebook Cooling-Pad ist dafür ausgelegt, die Leistung eines Notebooks durch Kühlung zu maximieren. 
Zwei  eingebaute  Lüfter  führen  kalte  Luft  über  das  Notebook  und  schützen  so  vor  Überhitzung.  Es  ist  für 
Notebooks mit 39,1 cm (15,4“) Größe und kleiner ausgelegt. 
Aus  Sicherheits-  und  Zulassungsgründen  (CE)  ist  das  eigenmächtige  Umbauen  und/oder  Verändern  des 
Produktes  nicht  gestattet.  Eine  andere  Verwendung  als  oben  beschrieben  ist  nicht  erlaubt  und  kann  zur 
Beschädigung  des  Produkts  führen.  Darüber  hinaus  ist  dies  mit  Gefahren,  wie  z.  B.  Kurzschluss,  Brand, 
Stromschlag usw. verbunden. Lesen Sie die Bedienungsanleitung genau durch und bewahren Sie diese für 
späteres Nachschlagen auf.
Lieferumfang
2. 
Cooling-Pad
• 
DC / USB Kabel
• 
Bedienungsanleitung
• 
Sicherheitshinweise
3. 
Bei  Schäden,  die  durch  Nichtbeachten  dieser  Bedienungsanleitung  verursacht  werden, 
erlischt die Gewährleistung/Garantie! Für Folgeschäden übernehmen wir keine Haftung!
Bei  Sach-  oder  Personenschäden,  die  durch  unsachgemäße  Handhabung  oder 
Nichtbeachten  der  Sicherheitshinweise  verursacht  werden,  übernehmen  wir  keine 
Haftung. In solchen Fällen erlischt die Gewährleistung/Garantie.
Wichtige Hinweise, die unbedingt zu beachten sind, werden in dieser Bedienungsanleitung 
durch das Ausrufezeichen gekennzeichnet.
Personen / Produkt
Das Produkt ist kein Spielzeug und sollte von Kindern ferngehalten werden!
• 
Beachten Sie auch die Sicherheitshinweise und Bedienungsanleitungen der übrigen Geräte, die an das 
• 
Gerät angeschlossen werden.
Das Produkt darf keinem starken mechanischen Druck ausgesetzt werden.
• 
Das  Produkt  darf  keinen  extremen  Temperaturen,  direktem  Sonnenlicht,  starken  Vibrationen  oder 
• 
Feuchtigkeit ausgesetzt werden.
Greifen Sie niemals in den rotierenden Lüfter, es besteht hohe Verletzungsgefahr! Beeinträchtigen Sie 
• 
nicht den ordnungsgemäßen Betrieb des Lüfters (etwa durch Einführen eines Fremdobjekts).
Sonstiges
Wartung, Anpassungs- und Reparaturarbeiten dürfen nur von einem Fachmann bzw. einer Fachwerkstatt 
• 
durchgeführt werden.
Sollten Sie noch Fragen haben, die in dieser Bedienungsanleitung nicht beantwortet werden, so wenden 
• 
Sie sich bitte an unseren technischen Kundendienst oder andere Fachleute.
Inbetriebnahme
4. 
Stellen Sie Ihr Notebook auf das Cooling-Pad. 
1. 
Verbinden Sie den DC Stecker des Kabels mit dem Cooling-Pad. Verbinden Sie den USB-Stecker des 
2. 
Kabels mit einem freien USB-Anschluss Ihres Notebooks. 
Drücken Sie den Schalter ON/OFF auf der Seite, um die Lüfter ein- (ON) oder auszuschalten (OFF). 
3. 
Die Lüfter kühlen nun das Notebook.
4. 
Entsorgung
5. 
Im  Interesse  unserer  Umwelt  und  um  die  verwendeten  Rohstoffe  möglichst  vollständig  zu 
recyclen, ist der Verbraucher aufgefordert, gebrauchte und defekte Geräte zu den öffentlichen 
Sammelstellen für Elektroschrott zu bringen.
Das Zeichen der durchgestrichenen Mülltonne mit Rädern bedeutet, dass dieses Produkt an einer 
Sammelstelle für Elektronikschrott abgegeben werden muss.
Technische Daten
6. 
Betriebsspannung:
5 V/DC
Stromverbrauch:
0,3 A
Lüftergröße:
70 x 70 x 15 mm
Lüftergeschwindigkeit:
1500 U/min ±15 % (Best.-Nr. 97 51 29), 
1200 U/min ±15 % (Best.-Nr. 97 51 30)
Geräuschpegel:
18,8 dB(A)
Betriebstemperatur:
-10 bis +70 ºC
Abmessungen (B x H x T) : 334 x 36 x 275 mm (Best.-Nr. 97 51 29), 
350 x 45 x 284 mm (Best.-Nr. 97 51 30)
Gewicht:
785 g (Best.-Nr. 97 51 29),
 850 g (Best.-Nr. 97 51 30)
Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder 
Art, z. B. Fotokopie, Mikroverfilmung, oder die Erfassung in elektronischen 
Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des 
Herausgebers. Nachdruck, auch auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung.
Änderungen in Technik und Ausstattung vorbehalten.
© 2010 by Conrad Electronic SE.
V2_10/10_02-HL
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g. 
photocopy, microfilming, or the capture in electronic data processing systems 
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print. 
We reserve the right to change the technical or physical specifications.
© 2010 by Conrad Electronic SE.
V2_10/10_02-HL