Thecus N5200 BR PRO Network Storage, Black N5200BR PRO Leaflet

 

 
 

16 

Once the hardware is installed, physically connected to your network, and 
powered on, you can configure the N5200PRO so that it is accessible to your 

network users. There are two ways to set up your N5200PRO: using the Thecus 
Setup Wizard or the LCD display. Follow the steps below for initial software 

setup. 

The handy Thecus Setup Wizard makes configuring N5200PRO a snap. To 
configure the N5200PRO using the Setup Wizard, perform the following steps: 

 

1.  Insert the installation CD into your CD-ROM drive (the host PC must be 

connected to the network). 

 

2.  The Setup Wizard should launch automatically. If not, please browse your 

CD-ROM drive and double click on Setup.exe. 

 

 
 

 
 

 
 
 

3.  The Setup Wizard will start and automatically detect all Thecus storage 

devices on your network. If none are found, please check your connection 

and refer to 

 for assistance. 

 

 

 

4.  Select the N5200PRO that you like to configure. 

 

5.  Login with the administrator account and password. The default account 

and password are both “admin”.  

 

For MAC OS X users, double click on Thecus Setup Wizard 1.1.6.dmg