Phocos Solar charge controller 321202 Data Sheet

Product codes
321202
Page of 2
•  Battery state-of-charge indication via 3 LEDs
•  Load disconnect pre-warning via acoustic signal
•  Four-stage PWM charging algorithm with (integrated)
temperature compensation (float, main, boost, and
equalization charging)
•  Automatic 12/24 V detection
•  Large terminals: up to 16 mm
2
•  SOC and voltage-controlled LVD
•  Full electronic protection
•  Aluminum housing (IP20)
•  Charger for external devices via USB port
•  Remote output connector for the Phocos inverter series
CMLsolid (30 A)  
Four-Stage PWM Solar Charge Controller
four-stage PWM charging algorithm (float-main-boost-
equalization) is adjustable for sealed and vented lead-acid 
batteries. The CMLsolid also allows either a SOC or voltage-
controlled low-voltage disconnect.
Battery status is clearly indicated via three LEDs, with an 
alarm for signaling a low-voltage disconnect.
The CMLsolid charge controller is the next stage in the 
development of the CML series. The controller is equipped 
with a number of outstanding features such as an alumi-
num housing, USB port, battery status display, alarm, and 
electronic protection against reverse battery polarity and 
reverse solar polarity. The temperature-compensated, 
Datasheet_CMLsolid30_1/2_e_2013-05-22_Subject to change without notice
www.phocos.com
Phocos AG 
Magirus-Deutz-Str. 12 
89077 Ulm, Germany
 
Tel.  +49 731 9380688-0 
Fax  +49 731 9380688-50