Homematic 103584 Wireless control hub 103584 User Manual

32

33

•  Establishing direct links between HomeMatic devices that remain 

active even without the involvement of the Central Control Unit

•  Setting up complex control tasks and individual logic functions via 

Central Control Unit programs.

B

C

D

E F G

Power

Internet

Info

A

H

Micro-SD

I

(A)  Power LED
(B)  Internet LED
(C)  Info LED
(D)  Recovery button
(E)  microSD/SDHC card slot
(F)  Power supply cable
(G)  USB device interface
(H)  USB host interface
(I)  Network cable

Please use the two screws and plugs supplied for wall mounting.

When selecting a mounting location and drilling in the vicinity 
of switches or socket outlets, make sure that there are no 
cables in the wall.

Do not mount the Central Control Unit in the vicinity of other 
sources of interference (e.g. WLAN or DSL routers). For 
notes on rectifying malfunctions, see Section 10. 

•  Hold the drilling template supplied (see additional sheet) at your 

intended mounting location and align it vertically and/or horizon-
tally.

•  Use a pen to mark the bore holes A and B (as shown on the 

drilling template) on the wall through the template. 

•  Drill the two marked holes into the wall with a diameter of 5 mm. 

Insert the plugs in the holes. Turn the screws into the plugs so 
that they protrude from the wall by approx. 1.5 mm. Working from 
above/from the right, hang the device using the brackets on the 
back (J) (see page 34) behind the screw heads.