Eurotronic Thermostat head 8 up to 28 °C 700100341 User Manual

Product codes

700100341

Travel function

For the time you are absent you can select an indi-

vidual temperature. After this period the originally

defined programme becomes active again.

Press

. Select the menu item

. Confirm

with

(suitcase

appears on the display).

Select with the selector wheel the end of the tra-

vel function (= date of the recommencement of the

regular heating times). Confirm with

. Set the

time and confirm with the button

. The signal

appears on the display. Now set the tempe-

rature and confirm with

appears on the

display. With

the function can be deactivated.

Child lock

You can lock SPARmatic comet to protect the de-

vice from unauthorized activation.

Press the buttons

at the same time

for about 2 seconds until the signal appears on

the display in order to lock the device. By using this

button combination again the symbol disappears

and you release the lock.

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 17

17.08.10 12:16

Help

Problem Cause

Solution

Batteries do not have

enough power.

Replace batteries.

Heating

element

does not

cool down.

Valve does not close

completely. It may be

that the closing point

of your valve seat has

shifted.

Adapt again (see “Adapt-

ing”) Move the valve stem

several times by hand, it

may be that adaptation is

impossible because your

valve is calcified or the

seat no longer performs

its function.

Heating

element

does not

warm up.

Is the boiler water

temperature O.K.?

Valve does not open,

is it calcified after

the summer pause /

heating pause?

Adjust the temperature of

the boiler water.

Remove the SPARmatic

comet, move the valve

stem back and forth per

hand or with a tool.

No adaptation

possible.

Is the installation OK?

SPARmatic comet is

not installed to the

heater.

Valve stroke is too

short.

Install SPARmatic comet

to the heater.

Open and close the valve

several times manually or

replace the batteries.

Motor movement is not

possible.

Does the valve stem

move freely?

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 21

17.08.10 12:16

Heating pause – Closing the SPARmatic comet

Press

. Select the menu item

with the

selector wheel. Confirm with

. Select

and confirm with

. Set the temperature on the

display to

. The valve is now closed and will

work without a time programme. The calcification

protection function remains active once a week.

After the heating pause you switch in the menu to

the AUTO-mode and the personally set program-

me will be executed again.
Going back to factory preset / All reset

Press

. Select the menu item

with the se-

lector wheel. Confirm with

. flashes, con-

firm with

. SPARmatic comet is reset again.

Now, proceed as described for the initial operation

(see p. 8).

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 18

17.08.10 12:16

Declaration of Conformity

The Declaration of Conformity is provided at:

www.eurotronic.org

Guarantee

The three-year warranty begins on the day of

purchase. Please keep the receipt as evidence of

purchase in the future. During the guarantee peri-

od, defective radiator thermostats may be sent to

the service address below. Please ensure suffici-

ent postage is paid. A new or repaired device will

then be sent to you free of charge. Following expiry

of the guarantee, you may still send the defective

device to the address below for repairs. Please en-

sure sufficient postage is paid. Repairs carried out

after the guarantee period are subject to a charge.

Your legal rights are not affected by this guarantee.

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 22

17.08.10 12:16

Freeze protection and calcification protection

function are active automatically:
Freeze protection function

If the temperature drops below 6°C, SPARmatic

comet opens the valve until the temperature again

rises above 8°C. This prevents the radiators from

freezing.
Calcification protection function

To prevent radiator valves from calcifying SPAR-

matic comet is submitted to a calcification protec-

tion programme once a week on Friday mornings.

Cleaning and used devices

Cleaning

To clean the SPARmatic comet use only a dry or

lightly wet cloth. Avoid chemical solvent – it can

probably damage the device.
Used devices

Do not throw old devices and packaging into the

household waste. They can be recycled. You re-

ceive further information at your local government.

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 19

17.08.10 12:16

Eurotronic Technology GmbH

Südweg 1 · 36396 Steinau-Ulmbach

Germany

Phone:

+49 (0) 66 67 / 9 18 47-0

e-mail:

info@eurotronic.org

Internet:

www.eurotronic.org

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 23

17.08.10 12:16

Adapters

Heimeier, Junkers Landys+Gyr, MNG,

Honeywell, Braukmann

thread-measure dimension of M 30x1,5

no adapter

required

Danfoss RAV (accompanying pin must

be plugged on the valve tapped)

Danfoss RA

Danfoss RAVL

Additional adapter types are listed at:

www.eurotronic.org

+ accompanying

pin, only for RAV!

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 20

17.08.10 12:16

www.eurotronic.org

.-n

| S

nd:

SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 24

17.08.10 12:16