American Dj ADJ UC3 RC FUNK-SYSTEM 1321000058 Leaflet
Product codes
1321000058
Introduction:
Congratulations and thank you for purchasing the American DJ UC3 RC. The UC3 RC is a great upgrade to our regular
UC3 controller. The UC3 RC System is an easy-to-use wireless controller for various American DJ fixtures compatiable
with the UC3 series of controllers. The UC3 RC has a transmitting distance of 300ft. or 100 meters. With the wireless
remote you are able to control Stand By (Black Out), Function, and Mode selection. This system allows performers
more freedom and creativity take their light show to the next level. Please refer to your units user manual for its indi-
vidual UC3 functions and controls.
Congratulations and thank you for purchasing the American DJ UC3 RC. The UC3 RC is a great upgrade to our regular
UC3 controller. The UC3 RC System is an easy-to-use wireless controller for various American DJ fixtures compatiable
with the UC3 series of controllers. The UC3 RC has a transmitting distance of 300ft. or 100 meters. With the wireless
remote you are able to control Stand By (Black Out), Function, and Mode selection. This system allows performers
more freedom and creativity take their light show to the next level. Please refer to your units user manual for its indi-
vidual UC3 functions and controls.
Customer Support: American DJ® provides a toll free customer support line, to provide set up help and to answer any
question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.
americandj.com for any comments or suggestions. For service related issue please contact American DJ®. Service Hours
are Monday through Friday 9:00 a.m. to 4:30 p.m. Pacific Standard Time.
question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.
americandj.com for any comments or suggestions. For service related issue please contact American DJ®. Service Hours
are Monday through Friday 9:00 a.m. to 4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void
your manufactures warranty. In the unlikely event your unit may require service please contact American DJ customer
support.
your manufactures warranty. In the unlikely event your unit may require service please contact American DJ customer
support.
The UC3 RC carries a 1 Year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your pur-
chase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return autho-
rization (R.A.) number. If the unit is under warranty you must provide a copy of your proof of purchase invoice. Please
contact American DJ® customer support for a R.A. number. For additional warranty info please visit our website.
chase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return autho-
rization (R.A.) number. If the unit is under warranty you must provide a copy of your proof of purchase invoice. Please
contact American DJ® customer support for a R.A. number. For additional warranty info please visit our website.
SET UP AND SYNCH: When using the UC3 RC please refer to your units user manual for its individual UC3 functions
and controls. Please see other side for the UC3 RC controls and functions.
and controls. Please see other side for the UC3 RC controls and functions.
1. Connect the 1/4” stereo jack to the 1/4” input on the back of your desired UC3 compatiable unit. The ON/OFF
switch is located on the bottom of the UC3 receiver, switch the power to ON.
switch is located on the bottom of the UC3 receiver, switch the power to ON.
2. Once you have connected the UC3 receiver to the unit, press the receivers SET UP button, the green SIGNAL
LED will start to flash.
LED will start to flash.
3. When the receivers SIGNAL LED is flashing, press any button on the UC3 RC Controller. Once you press any but-
ton, the SIGNAL LED will turn off. The set up process is complete and you can begin controlling your connected unit(s).
Note: The button you press on the UC3 RC Controller is the button row that will control your fixture. i.e. If you
press a button in Row 3 of the controller, Row 3 will control your fixture.
ton, the SIGNAL LED will turn off. The set up process is complete and you can begin controlling your connected unit(s).
Note: The button you press on the UC3 RC Controller is the button row that will control your fixture. i.e. If you
press a button in Row 3 of the controller, Row 3 will control your fixture.
RESET: Follow these instructions to reset the signal.
1
. Press and hold the receivers SET UP button until the green SIGNAL LED glows.
2. Now press the SET UP button once more to reset. If the reset was successfull the receivers SIGNAL LED will flash
quickly and then turn off.
quickly and then turn off.
Specifications:
Transformer Voltage..................................................................................................................................100~240V, 50/60Hz
Controller Battery...............................................................................................................................................................12V
Wireless Transmitting Distance.............................................................................................................................300ft. /100M
Frequency...............................................................................................................................................433.92Mhz
Receiver Dimensions......................................................................................................................3.5” (L) x 2.3” (W) x 0.9” (H)
Receiver Weight..............................................................................................................................................0.33lbs / 0.15Kg
Transmitter Dimensions....................................................................................................... 3.9” (L) x 1.8” (W) x 0.6” (H)
Transmitter Weight.........................................................................................................................................0.11lbs / 0.05Kg
Transformer Voltage..................................................................................................................................100~240V, 50/60Hz
Controller Battery...............................................................................................................................................................12V
Wireless Transmitting Distance.............................................................................................................................300ft. /100M
Frequency...............................................................................................................................................433.92Mhz
Receiver Dimensions......................................................................................................................3.5” (L) x 2.3” (W) x 0.9” (H)
Receiver Weight..............................................................................................................................................0.33lbs / 0.15Kg
Transmitter Dimensions....................................................................................................... 3.9” (L) x 1.8” (W) x 0.6” (H)
Transmitter Weight.........................................................................................................................................0.11lbs / 0.05Kg