Davis Instruments Vantage Vue Wireless Weather Station DAV-6250EU Data Sheet

2

Hardware included with the Vantage Vue ISS:

Note: 

If any of the hardware components are missing or not included, contact Customer Service toll free at 
1-800-678-3669 about receiving replacement hardware or other components. 

•

Adjustable wrench or 7/16” (11 mm) wrench

•

Compass or local area map

Follow the steps in the order; each builds on tasks completed in previous steps. 

Note: 

Use a clean, well-lit work table or work area to prepare the ISS for installation.

1. Attach the wind cups to the anemometer

2. Attach the wind vane

3. Install the rain collector tipping spoon assembly

4. Install the debris screen in the rain collector

5. Install the ISS battery to apply power

Note: 

At this point, we recommend that you set up your console, and then come back to finish the installation of 
the ISS. See your Vantage Vue Console Manual.

Additional steps for advanced set up: 

•

Verify transmitter ID 

•

Change the transmitter ID for wireless communication, if necessary

6. Verify data from the ISS

Backing plate

U-Bolt

1/4” lock washers

1/4” hex nuts

0.05” Allen wrench

3-Volt lithium battery

Debris screen

Battery cover with
thumbscrew