Davis Instruments Vantage Vue Wireless Weather Station DAV-6250EU Data Sheet
Product codes
DAV-6250EU
Setup Mode
9
Note: A Vantage Vue or Vantage Pro2 ISS or a Vantage Pro2 Anemometer Transmitter Kit must be
powered for the console to recognize it. Refer to the Integrated Sensor Suite Installation Manual
or other station manual for more information. It may take several minutes for the console to
acquire and display a transmitter ID after power is applied to both units.
or other station manual for more information. It may take several minutes for the console to
acquire and display a transmitter ID after power is applied to both units.
1. Make a note of the station number(s) listed on the screen.
2. Press DONE to move to the next screen.
2. Press DONE to move to the next screen.
Screen 6: Configuring Transmitter IDs
Setup Screen 6 allows you to change the ISS
transmitter ID and to add or remove optional
transmitter stations.
The default transmitter ID setting is “1 VUE
ISS” (refers to a Vantage Vue ISS), which is
appropriate for most installations. If you are using only the Vantage Vue ISS with ID 1 press
DONE to move to the next screen.
transmitter ID and to add or remove optional
transmitter stations.
The default transmitter ID setting is “1 VUE
ISS” (refers to a Vantage Vue ISS), which is
appropriate for most installations. If you are using only the Vantage Vue ISS with ID 1 press
DONE to move to the next screen.
Note: Typically, you can use the default transmitter ID setting of 1 unless a nearby neighbor has a
Vantage Pro2 or Vantage Vue station that uses transmitter ID 1.
If you wish to change this default transmitter ID:
1. Press the < and > keys to select a transmitter ID.
1. Press the < and > keys to select a transmitter ID.
When you select a transmitter ID (1 - 8), the ID number is displayed on the screen as well
as its current configuration (OFF, VUE ISS, VP2 ISS or WIND).
as its current configuration (OFF, VUE ISS, VP2 ISS or WIND).
2. Press the + or - keys to toggle console reception of signals from transmitters using that ID
on and off.
Note: Make sure any unused ID numbers are set to OFF.
To change the station type for the transmitter ID:
1. Press GRAPH to change the type of station assigned from VUE ISS to VP2 ISS or WIND.
1. Press GRAPH to change the type of station assigned from VUE ISS to VP2 ISS or WIND.
• VUE ISS - Refers tot the Vantage Vue ISS (whether direct transmission or retransmis-
sion from another console).
• VP2 ISS - Refers to the Vantage Pro2 ISS (whether direct transmission or retransmis-
sion from another console).
• WIND - Refers to an optional Anemometer Transmitter Kit (direct transmission only).
2. Press DONE to move to the next screen.
Note: This screen contains functionality for enabling repeaters. If the word “Repeater” displays in the