Davis Instruments Vantage Vue Wireless Weather Station DAV-6250EU Data Sheet

Console Location

4

1. Find the power jack located on the left side of the 

console case. 

2. Insert the power adapter plug into the console power 

jack, then plug the other end of the adapter into an 
appropriate power outlet.

3. Check to make sure the console runs through a brief 

self-test procedure successfully. See “Installing 
Batteries” on page 3 for information on the self-test 
procedure.

Note: When using an AC power adapter, be sure to use the power adapter supplied with your Vantage 

Vue console. Your console may be damaged by connecting the wrong power adapter. You must 
use AC power when using WeatherLinkIP.

Place the console in a location where the keyboard is easily accessible and the display is easy 
to read. For more accurate readings, follow these suggestions.
•

Avoid placing the console in direct sunlight. This may cause erroneous inside temperature 
and humidity readings and may damage the unit.

•

Avoid placing the console near radiators or heating/air conditioning ducts.

•

If you are mounting the console on a wall, choose an interior wall. Avoid exterior walls 
that tend to heat up or cool down depending on the weather.

•

Avoid positioning a wireless console near large metallic appliances such as refrigerators, 
televisions, heaters, or air conditioners.

•

The console antenna does not rotate in a complete circle. Avoid forcing the console 
antenna when rotating it. 

•

Be aware of possible interference from cordless phones or other devices. To prevent 
interference, maintain a distance of 10 feet (3 meters) between the Vantage Vue console 
and a cordless phone (handset and base).