Skoff LED floor standing light 15 W Warm white Aluminium , Transparent ME-LST-A-H-3-PL-PL-01 Data Sheet

Technical parameters

Assembly instruction 

1. Connect the wire connector of the body (1A) with the wire connector of the base (2A).

2. Insert the body (1) into the opening in the base (2) up to about 65 mm (the right depth is marked on the body with a horizontal line).

3. Fix the body (1) to the base (2) with Allen screws (3), remember to use the washers (4).

4. Connect the plug to a standard 230 V socket.

CAUTION!

All assembly works should be carried out by a qualified person. The installation should be performed according to the diagram. A correctly 
installed lamp is ready to use after connecting to the mains. For 2nd class protection against the electric shock ensure that the ground wire 
is neither damaged nor broken. DC power supply applied in the LED lamp is protected against short-circuit and overload. The maximium power 
consumption is 15 W. For such low energy consumption the lamps emit 720 luminous flux [Lm]. For comparison: the luminous flux 
of a standard 60 W bulb is 710. Moderno lamp efficiency is almost 4 times higher compared to a standard incandescent lamp. In case the outer 
flexible electrical cord gets damaged, it must be replaced by the lamp manufacturer, authorized service or a qualified person to avoid the risk 
of electrical shock.

Electrical wiring diagram

Lamp dimensions 

Colour 
temperature

Rated voltage 

720 lm

3 x 3,5 W LED 4500 

–

 5500 K

3 x 3,5 W LED 3000 

–

 3500 K

Rated power

Material

11 W

Protection class

L, N, PE

II

Type of switch

Ingress protection

foot-operated switch ON/OFF

IP20 

–

 interiors only

Weight

9,3 kg

Conformity with EMI standards
(emission)

Conformity with LVD standards

PN-EN 60598-1:2007, PN-EN 60598-2-6:2000

PN-EN 61547:2002

Protection 

against short-circuit and overload

Cool white

Index

Cool white

MODERNO ELEGANTE Floor lamp

MODERNO ELISSE Floor lamp

Warm white

Warm white

Technical parameters 

230 V AC 50Hz -15%, +10% 

Luminous flux

Connection wires

Conformity with EMI standards
(resistance) 

aluminum and glass

1

66

0

280

305

1

6

6

0

280

335

PN-EN 55015:2007, PN-EN 55015:2007/A1:2007

             PN-EN 55015:2007/A2:2009

F

L

N

Electrical installation

Lamp 

AC

DC

MO

–

LST

–

A

–

W

MO

–

LST

–

A

–

H

ME

–

LST

–

A

–

H

ME

–

LST

–

A

–

W

MADE IN POLAND

43-500 Czechowice-Dziedzice
ul. Legionów 243 D, POLAND
tel./fax +48 (32) 215 28 93
email: info@skoff.pl

MADE IN POLAND

43-500 Czechowice-Dziedzice
ul. Legionów 243 D, POLAND
tel./fax +48 (32) 215 28 93
email: info@skoff.pl