Phoenix Contact Surge protection connector PT 2-F-ST 2859000 2859000 Data Sheet
Product codes
2859000
Nov 14, 2013 1 / 7
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The illustration shows the version
PT 4-F-ST
Surge protection plug for the base element, surge voltage coarse protection for two signal lines
grounded on one side.
Product Features
Plugs can be checked with CHECKMASTER
For systems with high dielectric strength or fine protection installed
Maximum ease of maintenance thanks to the two-piece design
Installation location - directly where meas. and control cable enters building
Base element remains an integral part of the installation
Consistent plug-in signal circuit protection
Impedance-neutral disconnection of plug for test and maintenance purposes
For systems with high dielectric strength or fine protection installed
Maximum ease of maintenance thanks to the two-piece design
Installation location - directly where meas. and control cable enters building
Base element remains an integral part of the installation
Consistent plug-in signal circuit protection
Impedance-neutral disconnection of plug for test and maintenance purposes
Key commercial data
package_quantity
10
GTIN
4017918902452
Technical data
Dimensions
Height
45 mm
Width
17.7 mm
Depth
52 mm
Pitch unit
1 Div.
Height
90 mm
Width
17.7 mm
Depth
65.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C
Degree of protection
IP20
General
Housing material
PA 6.6