Voltcraft Kitchen furniture, work lights DF-7224 Silver-grey Built-in LED DF-7224 Data Sheet
Product codes
DF-7224
OPERATING INSTRUCTION
WWW.ROLUX-LEUCHTEN.DE
LED-Under Cabinet Light with Sensor
Model number: DF-3624 2,5W
Model number: DF-3624 2,5W
30cm
3008300135
Model number: DF-7224 5W
60cm
3008300137
Please read the instructions before you mount the LED-
Light.
Light.
Contents
1x LED-Under Cabinet Light DF-3624 / DF-7224
1x LED-Converter 6W, 24V with Euro Power Plug
Installation materials
Operating Instruction
Intended Use
The product is used for lighting in furniture, kitchens or living
rooms.
rooms.
The product is to be used only in dry indoor locations. It
must not get damp or wet.
must not get damp or wet.
Any use other than that described above will damage the
product and may involve other risks.
product and may involve other risks.
The guarantee is rendered invalid when damage occurs as a result of non-
compliance with the operating instruction! We do not assume any liability
for any damage arising as a consequence!
compliance with the operating instruction! We do not assume any liability
for any damage arising as a consequence!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instruction. Any
warranty claim will be invalid in such cases!
by improper use or non-compliance with the safety instruction. Any
warranty claim will be invalid in such cases!
The unauthorized conversion and/or modification of the product is
inadmissible because of safety and approval reasons (CE). Never
dismantle the product.
inadmissible because of safety and approval reasons (CE). Never
dismantle the product.
This product is only to be installed and used indoors in dry conditions.
The product must be protected from damp and wet as there is risk of a
fatal electric shock!
The product must be protected from damp and wet as there is risk of a
fatal electric shock!
Never look, directly or indirectly, into the light from the Illuminations,
the high intensity light may cause eyes injuries.
the high intensity light may cause eyes injuries.
Do not expose the product to strong mechanical stress. Do not expose it
to high (>40°C) or low (<0°C) temperatures, strong vibrations or direct
sunlight.
to high (>40°C) or low (<0°C) temperatures, strong vibrations or direct
sunlight.
Mounting
1. Set and mark the mounting space with the help of a ruler.
2. Place the mounting plate to the centre of the line with the
mounting brackets facing forwards, and fasten these in
place using the screws included in the delivery.
place using the screws included in the delivery.
3. You have two options for installing the under Cabinet
lamp supply cable:
The supply cable is guided into the wall from beneath
the mounting surface
the mounting surface
The supply cable is guided out via a drill hole in the
fixing surface. ! Drill hole for the DC supply cable min.
10mm!
fixing surface. ! Drill hole for the DC supply cable min.
10mm!
4. Push the back end of the lamps onto the plate mounting
edge until secure, and then carefully push the lamp onto
the mounting clips.
the mounting clips.
5. Push the back end of the lamps onto the plate mounting
edge until secure, and then carefully push the lamp onto
the mounting clips.
the mounting clips.
Connection and initial start-up
Connect the lamp to a proper mains power socket
(230V~/50Hz) via the LED safety converter with Euro
mains plug.
(230V~/50Hz) via the LED safety converter with Euro
mains plug.
Switch lamp on and off by moving your hand in front of
the sensor with a vertical motion (sensor range 10-
50mm).
the sensor with a vertical motion (sensor range 10-
50mm).
Dismounting
1. Switch lamp off and remove the power supply (pull mains
plug).
2. Push the lamp in the mounting edge direction first, so that
its connection with the mounting clips is loosened. You
may now fold the lamp forward and remove it from the
mounting plate.
may now fold the lamp forward and remove it from the
mounting plate.
Care and maintenance
Turn off the Lamp before clean and disconnect it from the
power supply (Pull the Power Plug)!
power supply (Pull the Power Plug)!
Apart from occasionally cleaning the product, it is maintenance free, never
decompose the product.
decompose the product.
Disposal
When the product is no longer usable, dispose it in accordance
with the applicable statutory regulations.
Technical Data
Model DF-3624
Model DF-7224
Operating Voltage:
230V~/50Hz
230V~/50Hz
Power:
2,5W
5W
Light color:
warm white 3.200K
warm white 3.200K
Number of SMDs:
36 Stk.
72 Stk.
Length:
300mm
600mm
Width:
36mm
36mm
Height
11,5mm
11,5mm
LED converter:
6W, 24V
6W, 24V