Gigaset E365 E365ECO User Manual
Product codes
E365ECO
36
Appendix
Gigaset E365 / GBR / A31008-M1806-L101-1-7619 / appendix.fm / 12.09.2007
Ver
si
on 4, 16.
09.20
05
Appendix
Symbols and typographical
conventions used
conventions used
This section explains the meaning of cer-
tain symbols and typographical conven-
tions that are used in this user guide.
~
~
Enter digits or letters.
§Menu§
The display functions cur-
rently in the bottom display
line are shown in reverse
video. Press the relevant dis-
play key to launch the
function.
q
Press the top or bottom of the
control key, e.g. when
scrolling.
c / Q / P etc.
Press the illustrated key on the
handset.
External Calls
/
Internal Calls
(example)
Select one of the menu func-
tions (
External Calls
or
Internal
Calls
) from the list and
press
§OK§
.
§§Menu§
¢
Audio Settings
¢
§OK§
¢
Ringer
Melody
(example)
¢
§OK§
Press
§Menu§
. Select
Audio Set-
tings
using
q and press
§OK§
.
Select
Ringer Melody
using
q
and press
§OK§
.
Care
Wipe the base station, charging cradle and
handset with a damp cloth (do not use
solvent) or an antistatic cloth.
Never use a dry cloth. This can cause
Never use a dry cloth. This can cause
static.
Contact with liquid
If the handset has come into contact with
liquid:
1. Switch off the handset and remove
1. Switch off the handset and remove
the battery pack immediately.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place for at least 72 hours (not
in a microwave, oven etc.).
4. Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will nor-
mally be able to use it again.
Questions and answers
If you have any questions about using
your phone, visit us anytime at
The table below contains a list of common
problems and possible solutions.
The display is blank.
1. The handset is not switched on.
1. The handset is not switched on.
¥
Press and hold the end call key
a
.
2. The battery is flat.
¥
Charge the battery or replace it
The handset does not respond to a key
press.
The keypad lock is activated.
The keypad lock is activated.
¥
Press and hold the hash key
#
!