Gw Instek USG-0103 Function Generator, Frequency Generator USG-0103 Data Sheet

 

•  The USG will not connect to the PC. 
•  Primary RF will not allow me to connect to the GSP-730. 
•  The performance does not match the specification. 

The USG will not connect to the PC. 

 

If you are running a Windows system, make sure that the USG USB 
driver has been installed correctly, see page 16 for details. If you are 
running Windows 8, please make sure that “Device driver 
signature enforcement” is disabled before installing the driver, see 
page 18 for details.  

Primary RF will not allow me to connect to the GSP-730. 

 

Make sure that all the USB cables from the USG and GSP-730 are 
connected correctly, then make sure that the NI.488.2 software is 
installed before Primary RF is installed. See page 20 for installation 
details. 

The performance does not match the specification. 

 

Make sure the device is powered On for at least 30 minutes, within 
+20°C~+30°C. This is necessary to stabilize the unit to match the 
specification. 

For more information, contact your local dealer or GWInstek at 
www.gwinstek.com / marketing@goodwill.com.