TP-LINK AV500 TL-PA411 User Manual

 

5

 

On  

The adapter is connected to a powerline network. 

Blinking   The adapter is transferring data. 

 Powerline LED 

Off 

The adapter isn’t connected to any powerline network or 
is in power-saving mode. 

On 

The Ethernet port is connected, but there is no data 
being transferred. 

Blinking  The Ethernet port is transferring data. 

 Ethernet LED 

Off 

The Ethernet port isn’t connected. 

)

5 minutes after the device connected to the adapter is turned off, and the adapter will automatically 
switch to the power-saving Mode.

     

There are three physical interfaces on this Powerline Adapter.   

 

Ethernet 

A 10/100Mbps Ethernet port for connecting the adapter to the PC or the 
broadband device with a network cable. 

Power Plug* 

A Power Plug for connecting the adapter to a 100V ~ 240V AC power 
socket. 

Pair Button 

Pair buttons are used to secure a powerline network. To secure your 
network, please follow the steps below. Firstly, plug in a new adapter, and 
press its pair button for 1 second; then plug in another adapter and press its 
pair button for 1 second as well. The two buttons should be pressed within 2 
minutes of each other. After that, wait about 60 seconds so that the two 
adapters can finish connecting.   

*

 The provided power plug may differ from the picture due to different regional power specifications. 

Here we take the EU version of this product as an example.