TP-LINK CPE510 User Manual
Chapter 3 Quick Setup Guide
5.
The Finish page will appear and display what you’ve configured previously. If you want to modify any
parameter, click Back to reconfigure it. If all are confirmed, click Finish to complete the configuration.
parameter, click Back to reconfigure it. If all are confirmed, click Finish to complete the configuration.
Repeater (Range Extender)
If Repeater (Range Extender) is selected, click Next and take the following steps:
1.
The LAN Settings page will appear as shown below. The default IP Address is 192.168.0.254 and the
default Subnet Mask is 255.255.255.0. You can change the IP Address and Subnet Mask on this page
when there is an IP conflict with other devices. We recommend you keep it by default. Click Next.
default Subnet Mask is 255.255.255.0. You can change the IP Address and Subnet Mask on this page
when there is an IP conflict with other devices. We recommend you keep it by default. Click Next.
- 14 -