Lappkabel 4725053K, Single Core Wiring Cable, , AWG, White Sheath 4725053K Data Sheet
Product codes
4725053K
U.I. Lapp
GmbH
DATA SHEET
H05Z-K 90°C (X05Z-K 90°C)
DB4725001EN
valid from: 2011-06-06
Originator: T. Merker / PCM
Document:
DB4725001EN
page 1 of 4
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
APPLICATION
(HD 516/VDE 0298-300 & HD 22.9/VDE 0282-9)
High-power current low voltage cable according to the cable type standard HD 22.9 (=VDE 0282-9)
Fix, protected installation and use
Inside of devices and control cabinets
On luminaire
Places/applications with high concentration of human beings and material assets, where low smoke
density and low emission of corrosive gases are required at in case of fire
Suitability for the laying inside of conduits installed on or under plaster in case of signal and control
current circuits only
Lifted conductor temperature range compared to standard unprotected single-core single-layer PVC-
insulated hook-up cables, thanks to higher maximum conductor temperature of +90°C
Permitted permanent operation/system voltages:
(Rated IEC voltage class H05) (HD 22.1/VDE 0282-1, HD 22.9/VDE 0282-9):
o
Phase/conductor to ground/PE (U
0
)
330 VAC, 495 VDC
o
Phase/conductor (not PE) to phase/conductor (not PE) (U) 550 VAC, 825 VDC
DESIGN
(HD 22.9/VDE 0282-9)
Conductor
Copper strands
Conductor class
Conductor class 5 according to IEC
60228/VDE 0295: Fine-wired and
flexible for fix laying/static use
Core insulation
Extruded, cross-linked, halogen-free
Polyolefin-based compound EI 5 in
line with EN 50363-5/VDE 0207-363
-5 and HD 22.1/VDE 0282-1
CABLE MARKING / CABLE TYPE CERTIFICATION
(HD 22.9/VDE 0282-9)
In case of harmonised versions according to HD 22.9/VDE 0282-9:
o
Cable type mark according to HD 22.9/VDE 0282-9: “H05Z-K”
o
H05Z-K ◄HAR► cable type certification according to HD 22.9/VDE 0282-9
o
◄HAR► testing and certification mark according to HD 22.1/VDE 0282-1 and HD 22.9/VDE
0282-9