Lappkabel 0070002, HEAT 180 SiD Single Core Wiring Cable, 1 x 1 mm², AWG, Blue Sheath 0070002 Data Sheet
Product codes
0070002
DATA SHEET
0068000
ÖLFLEX
®
HEAT 180 SiD
valid from :
10.12.2007
elaborated by:
TE-K: M. Herb / R. Krämer
Document:
DB0068000EN
page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX
®
HEAT 180 SiD are silicone-single cores and recommended for use in the case of high ambient tem-
peratures under sufficient ventilation and low mechanical stress. In the case of room temperature,
ÖLFLEX
ÖLFLEX
®
HEAT 180 SiD is largely resistant against oil, alcohol, acids, caustic solutions, salt solutions and salt
water.
Design
Conductor
solid conductor made of tinned copper
Core insulation
Silicone based compound EI2 acc. to HD 22.1 resp. VDE 0282-1
Core identification
coloured
Electrical properties at 20 °C
Nominal voltage
300 / 500 V
Test voltage
2000 V AC
Mechanical and thermal properties
Temperature range
-50 °C up to +180 °C max. conductor temperature
pay attention to sufficient ventilation, if ignoring
the max. conductor temperature is +100 °C.
Min. bending radius
10 x cable diameter for fixed installation
Flammability
flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
after combustion a SiO2-ash skeleton remains, which has still
good insulation properties but has no more any mechanical stability.
Halogen-free
acc. to IEC 60754-1 resp. VDE 0472 part 815
Corrosivity
acc. to IEC 60754-2 resp. VDE 0482 part 267-2-3
Tests
in acc. to IEC 60811-x-x resp. VDE 0473 part 811-x-x, VDE 0472
EC directive
this cable confirms to ECD 2006/95/EC
(low voltage directive).