Lappkabel 0065107, HEAT 180 SIF Single Core Wiring Cable, 1 x 4 mm², AWG, Transparent Sheath 0065107 Data Sheet
Product codes
0065107
DATA SHEET
0065101
ÖLFLEX
®
HEAT 180 SiF/GL
valid from :
10.12.2007
elaborated by:
TE-K: M. Herb / R. Krämer
Document:
DB0065101EN
page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX
HEAT 180 SiF/GL are silicone-single cores with glass fibre braiding and recommended for use in the
case of raised ambient temperatures under sufficient ventilation and small mechanical stress. In the case of room
temperature, ÖLFLEX
temperature, ÖLFLEX
HEAT 180 SiF/GL is largely resistant against oil, alcohol, acids, caustic solutions, salt
solutions and salt water.
Design
Conductor
tinned copper strands in acc. to IEC 60228 resp. VDE 0295, class 5
Core insulation
Silicone based compound EI2 acc. to HD 22.1 resp. VDE 0282-1
Core covering
lacquered glass fibre braiding
Electrical properties at 20 °C
Nominal voltage
300 / 500 V
Test voltage
2000 V AC
Mechanical and thermal properties
Temperature range
-50 °C up to +180 °C max. conductor temperature
pay attention to sufficient ventilation, if ignoring
the max. conductor temperature is +100 °C.
Min. bending radius
6 x cable diameter for fixed installation
15 x cable diameter for flex. applications
Flammability
flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
after combustion a SiO2-ash skeleton remains, which has still
good insulation properties but has no more any mechanical stability.
Halogen-free
acc. to IEC 60754-1 resp. VDE 0472 part 815
Corrosivity
acc. to IEC 60754-2 resp. VDE 0482 part 267-2-3
Tests
in acc. to IEC 60811-x-x resp. VDE 0473 part 811-x-x, VDE 0472
EC directive
this cable confirms to ECD 2006/95/EC
(low voltage directive).