Lappkabel 4530105, LiYCY Single Core Wiring Cable, 1 x 1.5 mm², AWG, Transparent Sheath 4530105 Data Sheet
Product codes
4530105
U.I. Lapp
GmbH
DATA SHEET
LiYCY single core
DB4530101
valid from: 10/19/2010
Product Developement Cable
Document:
DB4530101DE
page 1 of 1
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
Application
LiYCY single core is a screened, single core for wiring of measurement instruments, transmission and receiving equipment,
switch gear cabinets and electrical components. The screening provide protection against electrical interferences.
The cable is used in dry, damp and wet interiors but not appropriate for outside usage.
switch gear cabinets and electrical components. The screening provide protection against electrical interferences.
The cable is used in dry, damp and wet interiors but not appropriate for outside usage.
This cable confirms to RoHS directive (2002/95/EG).
Design
Conductor
tinned copper wires, conductor make-up:
0.14 mm²: No. of wires x Ø of wire 18 x 0,10, resistance max. 142.0 Ω/km
0.25 mm²: No. of wires x Ø of wire 14 x 0,15, resistance max. 82.0 Ω /km
0.5 bis 2.5 mm²: according to VDE 0295, class 5
0.14 mm²: No. of wires x Ø of wire 18 x 0,10, resistance max. 142.0 Ω/km
0.25 mm²: No. of wires x Ø of wire 14 x 0,15, resistance max. 82.0 Ω /km
0.5 bis 2.5 mm²: according to VDE 0295, class 5
Insualation
PVC TI2 to VDE 0207 part 4
Screen
braid of tinned copper wires
Outer sheath
PVC TM2 acc. to VDE 0207 part 5
Colour of the sheath: transparent
Colour of the sheath: transparent
Electrical properties at 20°
Specific insulation resistance
> 10 G Ω x cm
Peak working voltage
350 V (not for power applications)
Test voltage
800 V
Mechanical and thermal properties
Temperature range
Flexing: - 5˚C up to +70˚C
Fixed installation: - 30˚C up to +80˚C
Fixed installation: - 30˚C up to +80˚C
Flammability
flame retardant acc. to IEC 60 332-1-2
Design and characteristics is similar to VDE 0812.