Kingston Technology 1GB(2 x 512MB), 1066MHz, DDR2, Non-ECC, CL7, DIMM KVR1066D2N7K2/1G Data Sheet
Product codes
KVR1066D2N7K2/1G
Memory Module Specification
DESCRIPTION:
ValueRAM's KVR1066D2N7K2/1G is a kit of two 64M x 64-bit (512MB) DDR2-1066 CL7
SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 1GB (1024MB). The
components on each module include eight 64M x 8-bit DDR2-1066 SDRAM in FBGA
packages. Each 240-pin DIMM uses gold contact fingers and requires +1.8V. The electrical and
mechanical specifications are as follows:
SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 1GB (1024MB). The
components on each module include eight 64M x 8-bit DDR2-1066 SDRAM in FBGA
packages. Each 240-pin DIMM uses gold contact fingers and requires +1.8V. The electrical and
mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=7
1.875ns (min.)
Row Cycle Time (t
RC
)
58ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
105ns
Row Active Time (tRAS)
45ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
1.310 W (operating per module)
UL Rating
94 V - 0
Document No. VALUERAM0615-001.A00
01/24/08
Figure 1: KVR1066D2N7K2/1G 240-Pin DIMM
KVR1066D2N7K2/1G
1GB (512MB 64M x 64-Bit x 2 pcs.) DDR2-1066
CL7 240-Pin DIMM Kit
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
Units: millimeters
1.270 ± 0.10
2.7
2.50
1.00
0.20
2.50
±0.20
5.00
4.00
1.50±0.10
0.80±0.05
4.00
3.80
3.00
4.00