Kingston Technology 1GB 800MHz DDR2 ECC CL5 DIMM Intel KVR800D2E5/1GI Data Sheet
Product codes
KVR800D2E5/1GI
Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's 128M x 72-bit 1GB (1024MB) DDR2-800 CL5
SDRAM (Synchronous DRAM) ECC "Intel Verified" memory module. The components on
this module include eighteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-800 SDRAM in
FBGA packages. This 240-pin DIMM uses gold contact fingers and requires +1.8V. The
electrical and mechanical specifications are as follows:
SDRAM (Synchronous DRAM) ECC "Intel Verified" memory module. The components on
this module include eighteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-800 SDRAM in
FBGA packages. This 240-pin DIMM uses gold contact fingers and requires +1.8V. The
electrical and mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=5
2.5ns (min.) / 8ns (max.)
Row Cycle Time (t
RC
)
57.5ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
105ns
Row Active Time (tRAS)
45ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
2.106 W (operating)
UL Rating
94 V - 0
Document No. VALUERAM0605-001.A00
01/22/08
Figure 1: KVR800D2E5/1GI 240-Pin DIMM
KVR800D2E5/1GI
1GB 128M x 72-Bit DDR2-800
CL5 ECC 240-Pin DIMM
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
Units: millimeters
2.50
1.00
0.20
2.50
±0.20
5.00
4.00
1.50±0.10
0.80±0.05
4.00
3.80
3.00
4.00