Panasonic HDC-SD9EB-S User Manual

Page of 128
19
VQT1N58
Caution:
If the SD card is inserted or removed while the power is on, this unit may malfunction or the data 
recorded on the SD card may be lost.
1
Set the mode switch to OFF. 
(
20)
≥ Check that the status indicator has gone off.
2
Open the SD card cover while 
sliding the SD CARD OPEN lever 
B.
3
Insert/remove the SD card.
≥ Face the terminal side C in the direction 
shown in the illustration and press it straight in 
as far as it will go.
≥ Press the centre of the SD card and then pull it 
straight out.
4
Securely close the SD card cover.
≥ Securely close it until it clicks.
≥ Do not touch the terminals on the back of the SD card.
≥ Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the 
data stored on the SD card. We recommend saving the important data recorded on this unit to a PC, 
DVD disc etc. (l 82, 92)
≥ When the card access lamp is lit, do not:
jRemove the SD card
jOperate the mode switch
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
≥ Performing the above while the lamp is on may result in damage to data/SD card or this unit.
Inserting/removing an SD card
Card access lamp [ACCESS]
≥ When this unit is processing data, the 
access lamp A lights up.
First, format the SD card if one which has been used on another device is going to be used for the 
first time on this unit. (l 73) When the SD card is formatted, all of the recorded data is deleted. 
Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before 
proceeding with the formatting. (l 82, 92)
HDCSD9EP-VQT1N58_eng.book  19 ページ  2008年1月10日 木曜日 午後9時36分