Digitus DS-47110 Leaflet

1. Turn off the PCs and monitors.

2. Connect the HD-15 video extension cable between     

  the VGA card of PCs and the „video in“ port of matrix.

3. Connect the HD-15 video extension cables between     

  the monitors and the „video out“ port of matrix.

4. Connect the power cord and turn on the matrix.

5. Turn on the PCs and monitors.

6. Control front panal switch to obtain the image either    

  come from PC (A) [Linked LED „(A)“ on] or PC (B)  

 

  [Linked LED “(B)” on] or just switching off. [Linked  

 

  LED “(A) (B)” off]

Note:

•  All the “video out” ports will connect with the “video in”  

  port of (A) while turning on the video matrix.

•  If you install the DDC monitor for the splitter, the rest    

  of moni

    tors must be the same resolution as the DDC monitor. 

•   The functionality of DDC comes from „video in“ port of  

  (A) connecting with „video out“ port 1 as well as „video  

  in“ port of (B) connecting with „video out“ port 2.

•   Available monitors include the VGA, SVGA, XGA,  

 

  Mulitsync, and exclude the CGA, EGA, Mono.

1. The function to display image on more monitors, you

  request to attach video matrix or standard video 

  splitter.

2. Connect the HD-15 Male/Male video extension cable

  between the former matrix of the „video out“ port and    

  the latter matrix of the „video in“ port.

Note:

Even though you are allowed to cascade the matrix with 

varied ports, the image might become unstable if casca-

de too many tiers of matrix.

P.S.: The example cascades the 2 and 4 port video 

matrix; however, you can cascade the video matrix with 

desired port.

(1)

(2)

1. Select

2. (A), (B) Linked

(1)            (2)                           (3)

1. Input Power Jack.

2. (A), (B) „Video In“ Port

3. „Video Out“ Port

There are 2/4 out ports for the video matrix

-3-

-4-