Hellermann Tyton Edge Clip Cable Tie, Black, 4.6mm x 200mm, 1 pc(s) Pack, T50ROSEC4A-PA66W_D1 156-00570 156-00570 Data Sheet

Product codes

156-00570

Material

Polyamide 6.6 High Imp. Mod.,
Heat Stab. (PA66HIRHS)

Colour

Black (BK)

Operating

Temperature

-40 °C to +105 °C

Flammability

UL94 V2

Material

Polyamide 6.6 Heat Stabilised
(PA66HS)

Colour

Black (BK)

Operating

Temperature

-40 °C to +105 °C continuous,
(+145 °C for 500 h)

Flammability

UL94 V2

149

C a b l e T i e s a n d F i x i n g s

1.8

T50ROSEC23 - the cable bundle runs parallel with
the edge.

1-Piece-Fixing Tie T50SOSEC12 can be pushed
easily on edges.

• 2-Piece, 1.0 - 3.0 mm

• 2-Piece, 3.0 - 6.0 mm

The silver-grey clamp, the heart of our

EdgeClips, consists of double-tempered spring

steel in accordance with DIN EN 10132-4 C75S.

The spring steel gives the clamp both the

necessary rigidity to provide high pull-off

forces and also sufficient flexibility for various

possible applications.

The double coating is applied initially with a

zinc plate system followed by inorganic surface

sealing. Naturally, no chromium (VI) is used

in this process. The clamp therefore complies

with the current EU Directive 200/53/EC on

end of life vehicles and the prohibition on

heavy metals. The refined spring-steel clamp

also fulfils the requirements for resistance to

salt spray stipulated in DIN 50021-SS (min.

720 h with corrosion of base metal). This

solution has therefore been approved by

many OEMs for exposed installation locations,

e.g. in engine compartments and the

running-gear area.

T50ROSEC10 fitted onto a plastic panel to hold a Ø 6mm harness.

• 1-Piece, 1.0 - 3.0 mm

Fixing Ties for Edges

Features and Benefits

Available with either 'inside' or 'outside'

serrated ties these two piece assemblies simply

push onto metal or plastic 'edges' with

thicknesses from 1.0 to 3.0mm and from 3.0

to 6.0mm. The high 'pull off' forces are due

to the integrated metal clamp.

Different Edge Clip variations are available. One

version allows for cables to run parallel to the

metal/plastic edge, whilst another allows for

installation at 90 degrees to the metal edge.

The clip is simply pushed on by hand and held

firmly in place by the integrated metal clamp.

No fixing hole is necessary.

Combined with the outside serrated (OS) ties,

specially designed to protect cables from

chafing (see section 1.1) and wear, the Edge

Clip family provides an excellent fastening

solution.

Application

These cable ties and Edge Clip assemblies are

ideal for use where holes are not acceptable

or where due to temperature problems

adhesives will fail. These assemblies are

widely used for fixing and bundling cables,

pipes and hoses within the automotive

industry, harness making, panel buidling

and electrical industry.

F i x i n g T i e s

halogenfree

Material Data

Date of issue: April 2011