Technoline WT 250 WT250 SILBER Data Sheet

INSTRUCTION MANUAL WT250 

FEATURES: 

- Radio controlled clock 

- Manual time setting 

- 12-or 24-hour time display 

- Calendar display 

- Time zone (+/- 12 hours) 

- Indoor temperature in °C/°F 

- Alarm snooze function 

- 5 languages selectable display in Day-of –week: German, English, Spanish, Italian and French 

- LCD back-light 

 

SETTING UP: 

1.  Firstly, open the battery cover at the back of the clock. 

2.  Checking the correct polarization, insert 2xAAA, LR03, 1.5V batteries into the compartment and 

replace the cover. 

3.  When the batteries are inserted, the clock will be automatically scanning for the radio controlled 

time signal. 

4.  If after 6 minutes the DCF time has not been received, you can manually set the time. (see chapter 

manual time setting) 

5.  If the clock cannot receive the signal at the first time, it will automatically attempt to receive the 

signal again one hour later. 

6.  The clock will automatically receive the signal everyday 2.00 am. 

7.  When the clock is scanning for signal, only the WAVE key is operational.   

 

MANUAL TIME SETTING: 

In some cases after inserting the batteries, the clock may not be able to receive the DCF signal. In this 

situation, the time should be set manually. 

1.  Press and hold the TIME SET key for 3 seconds and the “hour” digits will start flashing, press UP 

or DOWN key to adjust the hour. 

2.  Press the TIME SET key again and the “minute” digits will start flashing, press the UP or DOWN 

key to adjust the minute. 

3.  Press the TIME SET key again and the “second” digits will start flashing, press the UP or DOWN 

key to clear the “second” to 0. 

4.  Press the TIME SET key again and the “year” digits will start flashing, press UP or DOWN key to 

adjust the year. 

5.  Press the TIME SET key again and the “dash” between “date” and “month” will start flashing, 

press UP or Down key to shift the position of “date” and “month”.