Kingston Technology 2GB 800MHz DDR2 Non-ECC CL6 SODIMM KVR800D2S6/2G Data Sheet
Product codes
KVR800D2S6/2G
Memory Module Specifications
KVR800D2S6/2G
2GB 256M x 64-Bit DDR2-800
CL6 200-Pin SODIMM
CL6 200-Pin SODIMM
Kingston.com
Document No. VALUERAM0618-001.A00 02/05/08
DESCRIPTION
This document describes ValueRAM’s 256M x 64-bit 2GB
(2048MB) DDR2-800 CL6 SDRAM (Synchronous DRAM)
memory module. The components on this module include
sixteen 128M x 8-bit DDR2-800 SDRAM in FBGA packages.
This 200-pin SODIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are
as follows:
(2048MB) DDR2-800 CL6 SDRAM (Synchronous DRAM)
memory module. The components on this module include
sixteen 128M x 8-bit DDR2-800 SDRAM in FBGA packages.
This 200-pin SODIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are
as follows:
SPECIFICATIONS
Clock Cycle Time (tCK) CL=6
2.5ns (min.) / 8ns (max.)
Row Cycle Time (tRC)
60ns (min.)
Refresh to Active/Refresh
127.5ns
Command Time (tRFC)
Row Active Time (tRAS)
45ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
1.584 W (operating)
UL Rating
94 V - 0
Figure 1: KVR800D2S6/2G 200-Pin SODIMM
Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM
combination and/or the module height may vary from what is described here.