Graupner Hendheld RC 2.4 GHz No. of channels: 8 33116 Data Sheet

Product codes
33116
Page of 200
20
Description of transmitter
Description of transmitter
Front of transmitter
Aerial with folding / rotating base
Rotary proportional control CTRL 7
3-position switch SW 4/5
2-position momentary 
switch SW 1
Rotary proportional 
control CTRL 6
Left-hand stick
Trim
ON / OFF switch
Left-hand touch-button
LCD screen
Right-hand touch-button
Trim
Right-hand stick
2-position switch SW 3
Carry handle
Neckstrap lug
Attaching the transmitter neckstrap
You will find a strap lug mounted in the centre of the 
front face of the 
mx-16 HoTT transmitter, as shown in 
the drawing on the right. This lug is positioned in such a 
way that the transmitter is perfectly balanced even when 
suspended from a neckstrap.
Order No.
 1121 
Neckstrap, 20 mm wide
Order No.    
 70 
Neckstrap, 30 mm wide
3-position switch SW 6/7
Rotary proportional control CTRL 8
Important note:
In the transmitter’s standard form any servos connected 
to the receiver can initially only be operated using the 
dual-axis sticks. For maximum flexibility, all the other 
transmitter controls (CTRL 6 ... 8, SW 1 ... 9) are “free” 
in software terms, and can be assigned to any channels 
you like, enabling you to set up the system to suit your 
personal preference or the requirements of a particular 
model. This is carried out in the “
contr set.” menu, as 
described on pages 94 (fixed-wing models) and 96 
(model helicopters).
2-position switch SW 2
2-position switch SW 8
2-position switch SW 9
Central Status LED