Spektrum SPMSR410 User Manual

EN

Type: DSMR  
Dimensions (LxWxH): 1.30 x .80 x .53 in (32.8 x 20.3 x 13.5mm) 
Channels: 4 

Weight: 0.25 oz (7.2 g) 

Band: 2.4GHz 

Voltage Range: 3.2–9.6V

Install the Receiver in your vehicle using double-sided foam servo tape. Foam 

servo tape will hold the receiver in place and help isolate it from vibrations. 

Mount the antenna up and away from the vehicle in an antenna tube. The 

higher up the antenna is, the better signal it will receive. The last 31mm of 

the antenna is the portion that receives the signal from the transmitter.

NOTICE: Do not cut or modify the antenna.

The throttle failsafe position is set during binding. In the unlikely event that 

the radio link is lost during use, the receiver will drive the the throttle servo 

to its pre-programmed failsafe position (normally full brakes) and all other 

channels will have no servo output. If the receiver is turned on prior to turning 

on the transmitter, the receiver will enter the failsafe mode, driving the the 

throttle servo to its preset failsafe position. When the transmitter is turned on, 

normal control is resumed.

IMPORTANT: Failsafe activates only in the event that signal is lost from the 

transmitter. Failsafe will NOT activate in the event that receiver battery power 

decreases below the recommended minimums or power to the receiver is lost.

The Spektrum™ SR410 4-channel DSMR® Sport Surface receiver is compat-

ible with all Spektrum DSMR surface transmitters. The SR410 receiver is NOT 

compatible with DSM® or DSM2® transmitters. 

Antenna

LED

Bind Plug

Bind/Battery Port

Steering Port

Throttle Port

Aux 1 Port

Aux 2 Port