Dialogic Diva PRI/E1/T1-CTI PCIe 306-320 Data Sheet

Product codes
306-320
Page of 8
Dialogic
®
 Diva
®
 PRI Media Boards
Datasheet
Diva Media Boards
3
Quick Reference
Voice resources 
0 (-CTI), 8 (-8), 24 (V-, UM-PRI/T1-24), 30 (V-, UM-, PRI/E1-30)
Fax resources 
0 (-CTI), 8 (-8), 12/15 (UM-PRI/T1-24 / E1-30), 30 (PRI/E1-30)
Conferencing resources 
0 (-CTI), 8 (-8), 24 (V-, UM-PRI/T1-24), 30 (V-, UM-, PRI/E1-30)
Maximum boards/system 
8 (tested by Dialogic); more than 8 are possible — depends on the application
CSP 
Yes
Form factor 
Low Profile: -CTI PCIe; Half Size: -CTI, -8 PCI; Full Size: V-, UM-PRI/T1-24 / V-, UM-, PRI/E1-30 PCI/PCIe
Resource bus 
PCI rev 2.2 up to 66 MHz or PCI Express 1.0a x1 lane (3.3/12 V)
Connection 
1 RJ-45 connector
Network interface 
E1/T1 and ISDN PRI (Primary Rate Interface) in TE and NT Mode
Signaling 
ETSI, NI-1, 4ESS, 5ESS, and all major ISDN protocols; QSIG; and many more
Operating system 
Windows
®
 and Linux. Details at 
http://www.dialogic.com/systemreleases
 
Volts 
PCI: 5; PCI Express: 3.3 and 12
Required accessories 
1 shielded RJ-45/RJ-45 cable
Hardware
•  32-bit RISC CPU, 300 MHz
•  2 (0)*, 10 (8)*, 24 (23/24)* or 31 (30/31)* DSPs (32.76 MHz and 65 MIPS)
    (*) The number in brackets states the number of available channels with DSP processing per board
•  Onboard SDRAM Memory: 64 MB
•  Telephony interface:
    — 1 x RJ-45, no RJ-45/RJ-45 cable supplied
•  Physical dimensions:
— PRI/E1/T1-CTI PCIe: 167.65 mm x 68.90 mm (PCB)
— PRI/E1/T1-CTI PCIe: 181.38 mm x 80.06 mm (with low profile bracket)
— PRI/E1/T1-CTI PCIe: 180.96 mm x 120.88 mm (with standard bracket)
— PRI/E1/T1-CTI PCI, PRI/E1/T1-8 PCI: 174.63 mm x 106.68 mm (PCB)
— PRI/E1/T1-CTI PCI, PRI/E1/T1-8 PCI: 187.84 mm x 126.37 mm (with bracket)
— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 312.00 mm x 111.15 mm (PCB)
— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 325.31 mm x 126.31 mm (with bracket)
— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 352.17 mm x 126.31 mm (with bracket and retainer)
•  High-impedance mode for passive monitoring
•  I/O addresses, memory, and interrupt allocated automatically
•  Plug-and-play interface
•   PCI: PCI 2.2, up to 66 MHz, 32 bit (also supports 64 bit dual address cycle DMA), 5 V supply required, 3.3 V, or 5 V universal signaling, supported in 
backwards compatible PCI-X slots
•  Production quality: ISO 9002
Technical Specifications