Clicc ClicLite Holz Sky 77 170 mWp, 35 mA, Kristallin Silizium 77 Data Sheet
Product codes
77
1. Basic device ClicLite
2. Solar panel
3. Interface ClicBar
4. Multifunctional button
2. Solar panel
3. Interface ClicBar
4. Multifunctional button
5. USB port (In/Output)
6.
White LED (lighting)
7. Green LED (State)
8. Key ring
9. Retainer
User Manual ClicLite
© Sonnenrepublik 08/2014
The ClicLite is a combination of a solar-powered mini
lamp, a USB-charger and a key ring. By using the ClicLite,
solar energy is now at your disposal anytime - a full
charge of the Clicc battery covers about 600h use of the
LED-spotlight or up to one hour extra-use of your
smartphone. Using our patented modular Clicc-system
including its integrated electric-interface ClicBar, almost
any quantity of Clicc modules can be plugged together.
That's how the performance, design and color of the
module array can be arranged to your individual needs.
The ClicLite is a combination of a solar-powered mini
lamp, a USB-charger and a key ring. By using the ClicLite,
solar energy is now at your disposal anytime - a full
charge of the Clicc battery covers about 600h use of the
LED-spotlight or up to one hour extra-use of your
smartphone. Using our patented modular Clicc-system
including its integrated electric-interface ClicBar, almost
any quantity of Clicc modules can be plugged together.
That's how the performance, design and color of the
module array can be arranged to your individual needs.
Safety instructions / Liability:
• The ClicLite contains a rechargeable Li-Ion battery
• The ClicLite contains a rechargeable Li-Ion battery
which might suffer severe damage in case of misuse
beyond the temperature-limits stated in the technical
data.
beyond the temperature-limits stated in the technical
data.
Misuse can cause risk of fire or explosion.
• Damage of the battery and other components can
• Damage of the battery and other components can
also emerge by overload of the USB output, e.g. by
short-circuit or use of defective or non-original
adapter cables and should be avoided under any
circumstances.
short-circuit or use of defective or non-original
adapter cables and should be avoided under any
circumstances.
• The solar cell encapsulation can be penetrated by use
of scissors or screwdrivers which will cause damage
to the product.
to the product.
• Do not use the device under humid conditions or in
case liquids have been inserted. If liquids have
penetrated the device it is urgently necessary to
immediately disconnect the device, pour out the
liquid from the USB socket and dry it.
penetrated the device it is urgently necessary to
immediately disconnect the device, pour out the
liquid from the USB socket and dry it.
• Keep the ClicLite away from children. There might
occur high current at the USB output and any contact
could cause injuries.
could cause injuries.
• Any unqualified modification or use of the device
other than described above is not allowed and may
cause damage. The guarantee will expire in case of
unqualified usage or of ignoring this manual. We do
not assume any liability for damages arising thereof.
cause damage. The guarantee will expire in case of
unqualified usage or of ignoring this manual. We do
not assume any liability for damages arising thereof.
The delivery contents:
The ClicLite is delivered with the following basic
equipment:
• Basic device ClicLite white
• Clicc solar panel in different colors
• Charging cable USB A-A
• Key ring with a turnable holder and mounting screw
• Manual
The ClicLite is delivered with the following basic
equipment:
• Basic device ClicLite white
• Clicc solar panel in different colors
• Charging cable USB A-A
• Key ring with a turnable holder and mounting screw
• Manual
Initializing, usage and functions
The ClicLite is ready for immediate use. The internal
battery is about 50% full at delivery and should first be
fully charged at a USB port or charger. After 4-5 complete
charge/discharge cycles the ClicLite reaches its full
capacity.
The key ring is already preinstalled. If you do not want to
use the ClicLite as a key-fob, you simply remove the key
ring from the mounting, and using a screwdriver, also
remove the mounting with the internally visible screw.
Now you can mount either the
Clip from the optional ClicSet
by screwing it there or keep
the opening free. Do not fix
the
The ClicLite is ready for immediate use. The internal
battery is about 50% full at delivery and should first be
fully charged at a USB port or charger. After 4-5 complete
charge/discharge cycles the ClicLite reaches its full
capacity.
The key ring is already preinstalled. If you do not want to
use the ClicLite as a key-fob, you simply remove the key
ring from the mounting, and using a screwdriver, also
remove the mounting with the internally visible screw.
Now you can mount either the
Clip from the optional ClicSet
by screwing it there or keep
the opening free. Do not fix
the
screw
too
tough,
otherwise the case might be
damaged.
The Clicc module can easily be drawn upwards from the
basic device. The best way to insert it is to first get the
one contact (as shown in the image) upside right in touch
with the counter-contact in the oblique direction. Then
press lightly, following
the arrow’s direction,
and at the same time
engage
damaged.
The Clicc module can easily be drawn upwards from the
basic device. The best way to insert it is to first get the
one contact (as shown in the image) upside right in touch
with the counter-contact in the oblique direction. Then
press lightly, following
the arrow’s direction,
and at the same time
engage
the
other
contact into the ClicBar.
If this is not easy to
handle, just try it the
other way around or
with the other contact
side at the Clicc module.
Attention: Too much pressure can break the contacts!
If this is not easy to
handle, just try it the
other way around or
with the other contact
side at the Clicc module.
Attention: Too much pressure can break the contacts!
The basic device can also be used without the Clicc
module as an LED spotlight, USB emergency storage or
module as an LED spotlight, USB emergency storage or
as a key ring. It is also possible to use a module array of
various Cliccs via the ClicBar Interface which increases
the charging performance accordingly.
In that case we recommend usage of the optional
ClicBoard which is fixed to the modules through adhesive
pads and stabilizes them. At
the back of the board are
additional supports which can
be unfolded.
In order to adjust the module
to the sun radiation, just open
it but make sure to support it at the backside. The best
way to do this is by using the optional ClicBoard.
The ClicLite has simply one button to activate all
different functions one after the other. The button is to
be touched briefly and thereby will jump to the next
function.
Function 0: Light and USB output are switched off
Function 1: White LED is in night light operation (light ON
time approx. 600h), USB output is switched on
Function 2: White LED is in low energy modus (light ON
time approx.: 50h), USB output is switched off
Function 3: White LED is switched on (light ON time
approx. 12h), USB output is switched off
Function charge status: Press button min. 1 sec., the
green LED is flashing between 0 and 4x corresponding to
the battery charge status between ca. 0 and 100%. 2x
means approx. 50%.
various Cliccs via the ClicBar Interface which increases
the charging performance accordingly.
In that case we recommend usage of the optional
ClicBoard which is fixed to the modules through adhesive
pads and stabilizes them. At
the back of the board are
additional supports which can
be unfolded.
In order to adjust the module
to the sun radiation, just open
it but make sure to support it at the backside. The best
way to do this is by using the optional ClicBoard.
The ClicLite has simply one button to activate all
different functions one after the other. The button is to
be touched briefly and thereby will jump to the next
function.
Function 0: Light and USB output are switched off
Function 1: White LED is in night light operation (light ON
time approx. 600h), USB output is switched on
Function 2: White LED is in low energy modus (light ON
time approx.: 50h), USB output is switched off
Function 3: White LED is switched on (light ON time
approx. 12h), USB output is switched off
Function charge status: Press button min. 1 sec., the
green LED is flashing between 0 and 4x corresponding to
the battery charge status between ca. 0 and 100%. 2x
means approx. 50%.
Charging of external devices: Devices with USB-A
charging cable can be connected to the ClicLite’s USB
outlet in function 1 (night light). A Smartphone can thus
be recharged by approx. 15-25% within about 30
minutes. This gives you about 1h talk time or internet
operation or 3-6 hrs standby time. It should be noted
charging cable can be connected to the ClicLite’s USB
outlet in function 1 (night light). A Smartphone can thus
be recharged by approx. 15-25% within about 30
minutes. This gives you about 1h talk time or internet
operation or 3-6 hrs standby time. It should be noted
that the charge status display is not very accurate in most
devices which might not reflect the real charge flown
into the battery.
devices which might not reflect the real charge flown
into the battery.
USB charging of the ClicLite: Using the functions 0, 2 and
3, an external USB source can be connected, e.g. the USB
port of a PC or notebook in order to recharge the ClicLite
in about 2-3 hours. After the battery is fully charged, the
ClicLite switches off the charging automatically to make
sure there is no overcharge.
Solar charging: The solar charging is possible via the
ClicBar interface at maximum performance in all
functions. After full charge of the internal battery, the
charging procedure finishes, just like the USB charging
procedure. Additionally the charging current of the
battery is being limited to a non-dangerous value which
more or less corresponds to the charging current of 6-9
Cliccs under full sun radiation. That is why an unlimited
number of Cliccs can safely be connected without
damaging the ClicLite. However, under bad light
conditions even a larger Clicc module array will not be
limited because of a lower charging current.
3, an external USB source can be connected, e.g. the USB
port of a PC or notebook in order to recharge the ClicLite
in about 2-3 hours. After the battery is fully charged, the
ClicLite switches off the charging automatically to make
sure there is no overcharge.
Solar charging: The solar charging is possible via the
ClicBar interface at maximum performance in all
functions. After full charge of the internal battery, the
charging procedure finishes, just like the USB charging
procedure. Additionally the charging current of the
battery is being limited to a non-dangerous value which
more or less corresponds to the charging current of 6-9
Cliccs under full sun radiation. That is why an unlimited
number of Cliccs can safely be connected without
damaging the ClicLite. However, under bad light
conditions even a larger Clicc module array will not be
limited because of a lower charging current.
Qty
Cliccs
Charging
power
nominal
power
nominal
Charging
time, full sun
time, full sun
Charging
time, sun,
behind
window
time, sun,
behind
window
Charging
time,
Slightly
cloudy
time,
Slightly
cloudy
1
0,17W
12-14h
3-5 days
6-12 days
3
0,5W
4-5h
1-2 days
2-4 days
6
1,0W
2-3h
4-6h
1-2 days
Storage and maintenance
The ClicLite should not be kept for a longer time in hot
or dusty locations. If liquids should have penetrated the
The ClicLite should not be kept for a longer time in hot
or dusty locations. If liquids should have penetrated the
device, switch it off at once, pour the liquid via the USB
exit and then dry the device. Under extremely dusty
conditions the contacts of the button and the USB socket
can get malfunctioned.
Under normal conditions there is no additional
maintenance required. The surfaces should only be
cleaned with a soft towel and warm water or a soft
detergent once in a while.
exit and then dry the device. Under extremely dusty
conditions the contacts of the button and the USB socket
can get malfunctioned.
Under normal conditions there is no additional
maintenance required. The surfaces should only be
cleaned with a soft towel and warm water or a soft
detergent once in a while.
Technical data:
Rated power/voltage/current Solar panel:
170mWp / 5V / 35mA
USB output voltage/ current:
5V / 450mA (charging of external devices)
USB input voltage/ current:
5V / 250mA (internal charging by USB port)
Internal battery capacity: 1,6Wh
Protective circuits:
Short circuit of USB output, input current USB and ClicBar,
overcharge & deep discharge battery
Temperature: Charge 0 … +45°C, Discharge -20 … +60°C
Maximum relative humidity: 90%
Measures / weight: 55 x 42 x 17mm, 40g
Compliance / standards: CE, RoHS, EN 61006-4
Rated power/voltage/current Solar panel:
170mWp / 5V / 35mA
USB output voltage/ current:
5V / 450mA (charging of external devices)
USB input voltage/ current:
5V / 250mA (internal charging by USB port)
Internal battery capacity: 1,6Wh
Protective circuits:
Short circuit of USB output, input current USB and ClicBar,
overcharge & deep discharge battery
Temperature: Charge 0 … +45°C, Discharge -20 … +60°C
Maximum relative humidity: 90%
Measures / weight: 55 x 42 x 17mm, 40g
Compliance / standards: CE, RoHS, EN 61006-4
Disposal of waste:
Electronic devices, primary and secondary
batteries must not be treated as household
waste. You can return used products
optionally at municipal collection, trading
spots or directly at our address (see below) - everywhere
free of charge. Please pay attention to EU regulation
2002/96/EC.
Used batteries may contain polluted material, or heavy
metal that may cause severe effects on environment and
Electronic devices, primary and secondary
batteries must not be treated as household
waste. You can return used products
optionally at municipal collection, trading
spots or directly at our address (see below) - everywhere
free of charge. Please pay attention to EU regulation
2002/96/EC.
Used batteries may contain polluted material, or heavy
metal that may cause severe effects on environment and
health. Batteries can be recycled as they
contain important raw materials like cobalt,
manganese, aluminum or nickel.
Disposal of all packaging material should be
done according to environmental standards.
Guarantee:
We provide a warranty of 24 months from the delivery
date. It is limited to all faults of production and material
except the ones mentioned below. There is no right of
complaint if there is only a neglect able deviance from
the agreed quality, a minor restriction of usefulness or
natural deterioration. Damage due to wrong or incom-
petent treatment, extreme usage or damage based on
unusual external effects that have not been considered
in the agreement also lead to no right of complaint. In
case you or a third person might do improper repair
work or modifications, there is also no right of complaint
concerning the consequences of these modifications.
The modification or removal of the device's components
is also considered as inadequate usage. Please contact
us in case of a complaint before returning an item.
Sonnenrepublik GmbH
Reuchlinstr. 10-11, Staircase S, 10553 Berlin
service@sonnenrepublik.de, www.sonnenrepublik.de
contain important raw materials like cobalt,
manganese, aluminum or nickel.
Disposal of all packaging material should be
done according to environmental standards.
Guarantee:
We provide a warranty of 24 months from the delivery
date. It is limited to all faults of production and material
except the ones mentioned below. There is no right of
complaint if there is only a neglect able deviance from
the agreed quality, a minor restriction of usefulness or
natural deterioration. Damage due to wrong or incom-
petent treatment, extreme usage or damage based on
unusual external effects that have not been considered
in the agreement also lead to no right of complaint. In
case you or a third person might do improper repair
work or modifications, there is also no right of complaint
concerning the consequences of these modifications.
The modification or removal of the device's components
is also considered as inadequate usage. Please contact
us in case of a complaint before returning an item.
Sonnenrepublik GmbH
Reuchlinstr. 10-11, Staircase S, 10553 Berlin
service@sonnenrepublik.de, www.sonnenrepublik.de