Dialogic Diva SIPcontrol 30 CH SW license M05-060 Data Sheet

Product codes

M05-060

Dialogic

Diva

SIPcontrol

™

Software converts Dialogic

Diva

boards (Universal and V-Series) into SIP-enabled

PSTN-IP gateways. The boards support a variety of TDM protocols and interfaces, ranging from analog over ISDN and
QSIG with BRI and PRI interfaces to E1/T1 digital variants.

The resulting SIP gateway can be used to add rich IP communication, presence, instant messaging, and multimedia
with video to traditional voice-only applications sets. The gateway creates a bridge between the SIP applications and the
switch or PBX required for connection to the PSTN, allowing voice calls to be sent to and received from TDM phones.

Diva SIPcontrol translates call control information from the Diva

board into SIP messages while voice channels are

converted into IP packets and streamed via the RTP protocol. When Diva SIPcontrol and Diva boards are combined
in a Windows

-based server, the result is a functional PSTN-IP gateway appliance with the benefits of using industry-

standard hardware and operating systems and the proven reliability of dedicated telephony boards.

Two versions of the Diva SIPcontrol software are available:

•

Version 1.5 — Can be used in conjunction with Dialogic Diva boards to provide an interface for Dialogic

Host

Media Processing Software. In the resulting hybrid TDM/IP environment, Dialogic HMP Software applications
written to Dialogic

Global Call and Dialogic

R4 APIs can send and receive voice, DTMF, speech, or fax calls

concurrently from TDM via ISDN BRI interfaces and from IP via H.323 and SIP interfaces.

•

Version 1.6 — Optimized for use with Microsoft

Office Communications Server 2007 and Microsoft

Exchange

Server 2007. Version 1.6 adds  new features to Version 1.5  such as  web-based configuration, enhanced call routing
capabilities, enhanced address manipulation, configurable cause codes, an improved dial plan, trunk selection
for outgoing calls,  and enhanced regular expressions. Note: Version 1.6 does not provide an interface for
Dialogic  HMP Software.

Datasheet

Diva SIPcontrol

Dialogic

Diva

SIPcontrol

™

Software

Features

Benefits

Designed in accordance with Microsoft

SIP specifications and

supports SIP over TCP according to RFC 3261

Works with Microsoft

SIP-based applications, including

Microsoft

Exchange Server 2007 with Unified Messaging and

Microsoft

Office Communications Server 2007

Scales downward to support 2-, 4-, and 8-port configurations
and upward to as many as 120 channels

Provides flexible deployment and can be used with analog or
ISDN BRI interfaces in small-to-medium enterprises or with
multiple digital E1/T1 spans in medium-to-large enterprises

Used with Diva boards that support major ISDN protocols,
QSIG, and vendor implementations of supplementary services

Supports direct PSTN and PBX connectivity

Works with DSPs on Diva boards to support voice activity
detection, silence suppression, echo cancellation with up
to 128 ms tail length, and anti-jitter buffering

Enables high-performance media processing

Supports DTMF fax collection/generation according to rfc2833
and fax detection and converts to Fax over IP (FoIP) (on fax-
enabled Diva boards only) according to the T.38 standard
(up to 33.6 kbps)

Converts DTMF fax to FoIP (and vice versa) as required

Diva boards used with Diva SIPcontrol conform to plug-and-play
standards and use Microsoft

Management Console for simple

and straightforward configuration

Easy to install and configure

Works in conjunction with Dialogic Diva Media Boards and
Dialogic HMP Software (Version 1.5)

Provides a PSTN interface for Dialogic HMP Software in a
hybrid TDM-IP environment