Alinco DJ-X-7 E hand-held scanner 1839 Data Sheet
Product codes
1839
38
8
Maintenance
and
Reference
8.2 Resetting
The resetting deletes all programmed memory channels and
returns to the initial (default) factory settings.
returns to the initial (default) factory settings.
1. Hold the
key for 1 second to turn the power ON
while holding the [F] key.
2. Release the keys when all icons and indicators are
displayed.
The receiver returns to the initial VFO mode.
■Factory default value
• VFO frequency
145MHz
• Max number of memory channels
1000ch
• Volume level
30
• Squelch level
3
• Tuning step
Auto
8.3 Optional Accessory List
EBP-58N:
Li-Ion rechargeable battery pack (3.7V 600mAh)
EDC-126:
AC Adapter (6.0V 0.5A/120V for DJ-X7T)
EDC-128:
AC Adapter (6.0V 0.5A/220V for DJ-X7E)
EME-25:
Curl-cable earphone/antenna
EDH-32:
Cigar-socket DC cable
EME-18:
Straight-cable earphone
ESC-38:
Softcase
ERW-4C:
PC interface-cable
PWR
Caution
Before resetting the receiver, be sure to check out the
setting of the Write-protect function (see on P.34).
Executing the resetting with the function OFF state
deletes all programmed memory channels and returns to
the initial (default factory) settings.
Once you execute the resetting and delete the data
you've programmed, it is not possible to undo it (unless
you saved the data in your computer with the editing
software).
setting of the Write-protect function (see on P.34).
Executing the resetting with the function OFF state
deletes all programmed memory channels and returns to
the initial (default factory) settings.
Once you execute the resetting and delete the data
you've programmed, it is not possible to undo it (unless
you saved the data in your computer with the editing
software).