Alinco DJ-X-7 E hand-held scanner 1839 Data Sheet

5

• Do not open the case nor touch the interior components.

Tampering can damage the receiver.

• Do not place the receiver in any place where it will be

subjected to direct sunlight, dust, or high temperatures.

• Keep the receiver away from TVs, tuners, or other equipment

if it interferes with reception.

• Ensure that the provided antenna is securely mounted.
• Turn the power OFF immediately if the receiver should emit

smoke or strange odors. Ensure that the receiver is safe, then
contact the nearest Alinco Service Center.

• Use a regulated 3.7V to 6.0V DC external power supply.
• Never use any external power supply which exceeds 6.5V.

Otherwise, this may cause the serious damage.

• To charge the battery or operate the receiver using AC power,

use the provided AC adapter (EDC-126 or EDC-128
depending on the version). Connect the adapter to the
receiver's DC-IN jack directly.

• When power is supplied from the cigarette socket of a car,

use the optionally available cigar-socket DC cable (EDH-32).

• Turn the receiver's power OFF when connecting or

disconnecting the cable of external power supply.

• This receiver is manufactured and shipped under strict quality

control. However, in some rare instances, if questionable or
doubtful points are found, please notify the store where you
purchased the receiver.

• Since this is a wide band communication receiver, its internal

oscillation can sometimes block a signal, or detect an internal
signal (sometimes referred to as a "birdie"). These symptoms are
not a malfunction.

• Specifications and information found in this document are

subject to change without notice.