Midland G7 N/A PMR Radio 930419 Declaration Of Conformity
Product codes
930419
DO:
Rev:
Rev:
7.1.4.4
0
0
Authorised on: 30/08/2003
By : S. Peterlini
By : S. Peterlini
EC Certificate of Conformity
(to EC Directive 99/5-89/336-93/68-73/23)
Signature
This document is owned by Cte International srl. It is forbiddeen to reproduce or diffuse it without the authorisation of the Quality
Assurance Manager of CTE International srl.
Assurance Manager of CTE International srl.
DECLARATION OF CONFORMITY N°05250501
Manufacturer:
C.T.E. International S.r.l.
Address:
Via Sevardi, 7 - Zona Industriale Mancatale - 42010 Reggio Emilia
Products Name:
MIDLAND G7
Product Type:
PMR446 & SRD TRANSCEIVER VOICE TX
The product described above is in conformity with the following Specifications based on sample testing:
Item of
99/05/CE
99/05/CE
Standard Title
Edition
or date of issue
3.1a
EN 60950-1
Information technology equipment - Safety --
2001
3.1b
EN 301 489-03 Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services; Part 3: Specific conditions for Short-Range Devices
(SRD) operating on frequencies between 9 kHz and 40 GHz
V1.4.1
3.1b
EN 301 489-05 Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services; Part 5: Specific conditions for Private land Mobile
Radio (PMR) and ancillary equipment (speech and non-speech)
V1.3.1
3.2
EN 300 296-2 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land Mobile Service; Radio equipment using integral antennas
intended primarily for analogue speech; Part 2: Harmonised EN
covering essential requirements under article 3.2 of the R&TTE
Directive
V1.1.1
3.2
EN 300 220-3 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment to be used in the 25
MHz to 1 000 MHz frequency range with power levels ranging up
to 500 mW; Part 3: Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive
V1.1.1
Supplementary information to the conformity assessment result on which the declaration is based:
Conformity assessment procedures are referred to art. 10(4) linked with Annex III of Directive 1999/5/ec.
The test sample fulfils the requirements specified above, on the basis of test result and their evaluation.
The product herewith complies with the essential requirements of EC Directive 99/05/EC, 89/336/EEC,
92/31/EEC, 93/68/EEC, 73/23/EEC, 93/97/EEC. Reference to any marking or other indication (e.g. on the
92/31/EEC, 93/68/EEC, 73/23/EEC, 93/97/EEC. Reference to any marking or other indication (e.g. on the
product) is exhibited in attachment to this declaration.
Reggio Emilia, 25/05/05
CTE International srl
Quality Assurance Manager
Peterlini Stefano