Albrecht Cb Transceiver Ae 2990 10190 User Manual
Product codes
10190
26
F. MIC-G:
Indicates that the Mic-Gain feature has been activated.
G. PS:
Indicates that the Power save feature has been activated.
H.
The key symbol indicates the key lock feature has been activated.
I. "+/-":
Indicates + and – shift mode.
J. "м":
Indicates that the Memory feature has been activated.
K. Memory Nr. :
Indicates that a Memory location number has been activated.
L. CH/FR.
Frequency Indicator: Displays the corresponding channel / frequency,
in which the radio is operating on.
in which the radio is operating on.
M. Busy; Meter:
Your unit shows an eighteen segment bar graph for incoming signal
and power output in the liquid crystal display panel.
and power output in the liquid crystal display panel.
When receiving a signal, the meter will indicate how strong the signal
is. A weak signal will be indicated by five or seven segments, while a
very strong signal will have 9 or more segments.
is. A weak signal will be indicated by five or seven segments, while a
very strong signal will have 9 or more segments.
When transmitting, the letter “TX” will appear on the display. If the
radio is operating in the HIGH power position, 9 to 10 segments will be
displayed, depending on the condition of your batteries. If the radio is
operating in the LOW power position, only 3 to 5 segments will appear.
displayed, depending on the condition of your batteries. If the radio is
operating in the LOW power position, only 3 to 5 segments will appear.
N. SQ:
Indicates that the squelch feature has been activated.
O. RPT:
Indicates that the RPT feature (156.7 Hz CTCSS) has been activated.
P. BATT
Indicates batteries are getting low.
Q. Beep Tone
Indicates that the beep tone feature has been activated.
R. LSB:
Indicates lower side band mode operation.
S. USB:
Indicates upper side band mode operation.
T. AM:
Indicates AM mode operation.
U. FM:
Indicates FM mode operation.
V. RGB Tone
Indicates that the Roger beep tone feature has been activated.