Laserliner 081.124A User Manual

Page of 92
06
Compact cross-line laser with 2 laser lines
–  Readily visible laser lines are outstanding for aligning tiles, 
wall studding, windows, doors, etc 
–  Simple to use by virtue of its magnetic-dampened pendulum 
system. 
–  Out-Of-Level: is indicated by optical signals when the unit 
is outside ist self-levelling range. 
–  The slope-mode feature is an extra that permits gradients to be 
laid out.
Special product features
 
    Automatic alignment of the device with a magnetically 
dampened pendulum system. The device is brought into initial 
position and aligns itself autonomously.
 
   Transport LOCK: The device is protected with a 
pendelum lock during transport.
Caution: Do not look directly into the beam. Lasers must be kept 
out of reach of children. Never intentionally aim the device at 
people. This is a quality laser measuring device and is 100% factory 
adjusted within the stated tolerance. For reasons of product liability, 
we must also draw your attention to the following: Regularly check 
the calibration before use, after transport and after extended periods 
of storage. We also wish to point out that absolute calibration is 
only possible in a specialist workshop. Calibration by yourself is only 
approximate and the accuracy of the calibration will depend on the 
care with which you proceed.
General safety instructions
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2007-10
Number and direction of the lasers
1H = 1 horizontal laser line
1V  = 1 vertical laser line
S   = Slopefunction
S
1H 1V
Read the operating instructions and the enclosed brochure 
„Guarantee and additional notices“ completely. Follow the 
instructions they contain. Safely keep these documents for 
future reference.
!
GB