Dremel 910 (910-3) F.013.091.0JA User Manual

Product codes
F.013.091.0JA
Page of 80
7
 DRIP-CONTROL FUNCTION 
When heated up, the glue gun has a drip-control function. 
This prevents the glue from dripping when the glue gun 
is at operating temperature.
NOTES: During heating-up the glue gun may release 
a few drops of glue.
Do not use glitter or colour sticks at high 
temperature. The drip-control function will not work 
properly.
Model 940: EXCHANGE NOZZLE
• 
 Use a spanner and turn the nozzle from the 
housing.
• 
Mount a new nozzle on the housing.
CHANGING GLUE STICKS
Do not attempt to remove the unused portion of the 
glue stick from your glue gun. If you need to switch 
glue stick formulas, empty the melting chamber by 
squeezing the trigger and insert new formula.
STAND / KICK STAND
When glue gun is hot, do not lay on its side. Always 
use stand.
• 
Push stand (4) into “down” position when 
temporarily not in use (models 910, 920 and 
930). 
• 
Push the stand release button (8) to release the 
stand (model 940).
When re-using or storing, push stand back into 
“up” position.
MAINTENANCE
CLEANING
BEFORE ANY WORK ON THE UNIT ITSELF, PULL THE 
MAINS PLUG.
Always keep the unit clean so that it functions 
properly and accurately.
SERVICE AND WARRANTY
This DREMEL product is guaranteed in accordance 
with statutory/country specifi c regulations; damage 
due to normal wear and tear, overload or improper 
handling will be excluded from the guarantee. 
If the unit should fail despite the care taken in 
manufacturing and testing, send it undismantled 
together with proof of purchase to your dealer.
CONTACT DREMEL
For more information on the Dremel assortment, 
support and hotline, go to www.dremel.com
Dremel Europe, P.O. Box 3267, 4800 DG Breda, The 
Netherlands
ALLGEMEINE 
SICHERHEITSANLEITUNGEN
GEFAHRLOSES ARBEITEN MIT DEM 
GERÄT IST NUR MÖGLICH, WENN SIE 
DIE BEDIENUNGSANLEITUNG UND DIE 
SICHERHEITSHINWEISE VOLLSTÄNDIG 
LESEN UND DIE DARIN ENTHALTENEN 
ANWEISUNGEN STRIKT BEFOLGEN.
• 
Wird bei der Arbeit das Netzkabel beschädigt 
oder durchtrennt, Kabel nicht berühren und 
sofort den Netzstecker ziehen. Gerät niemals mit 
beschädigtem Kabel benutzen.
• 
Ein beschädigtes Netzkabel muss vom Hersteller, 
seinem Kundendienstpartner oder ähnlich 
qualifi zierten Personen ausgetauscht werden, 
um Gefährdungen zu vermeiden.
• 
Das Gerät darf nicht feucht sein und auch nicht 
in feuchter Umgebung betrieben werden.
• 
Nur für die Verwendung in geschlossenen 
Räumen.
• 
Kabel immer nach hinten vom Gerät wegführen.
• 
Bei Arbeitspausen von mehr als 30 Minuten 
Netzstecker ziehen.
• 
Dieses Gerät darf nur dann von Personen 
(einschließlich Kindern) mit eingeschränkten 
körperlichen, sensorischen oder geistigen 
Fähigkeiten bzw. mangelnder Erfahrung und 
Kenntnissen benutzt werden, wenn diese von 
einer für ihre Gesundheit verantwortlichen Person 
im Gebrauch des Geräts beaufsichtigt oder 
angeleitet werden.
• 
Kinder sind zu beaufsichtigen, damit sie nicht 
mit dem Gerät spielen können. 
• 
Dremel kann nur dann eine einwandfreie 
Funktion des Gerätes zusichern, wenn das für 
dieses Gerät vorgesehene Original-Zubehör 
verwendet wird.
• 
Bearbeiten Sie kein asbesthaltiges Material 
(Asbest gilt als krebserregend).
D
2610399275-GlueGun-EU-0610.indb   7
10399275-GlueGun-EU-0610.indb   7
3-6-2010   12:47:17
3-6-2010   12:47:17