Voltcraft 100 - 240 VCharger ForLiPolymer, LiFeRechargeable batteries SK-1000555 User Manual

•  Charger
•  Mains cable
•  Charging cable with open cable ends
•  Charging cable with T plug
•  Operating instructions

The charger can be operated from a mains outlet (100 - 240 V/AC, 50/60 Hz).
Use the switch to select the type of rechargeable battery (LiPo or LiFe) to recharge using the 

charger.
Use a charging cable to connect the rechargeable battery pack you wish to charge to the 

charger (LiPo or LiFe, 2 - 4 cells connected in series).
There are two different charging cables included:
•  Charging cable with two 4 mm banana plugs to one T plug
•  Charging cable with two 4 mm banana plugs to two open cable ends
  Plugs suitable for the type of rechargeable battery you use (not included) must be soldered 

to the open cable ends.

Use the switch to set the required charging current (1 A, 2 A or 3 A) before charging. A color 

LED indicator shows the charge state.
An XH balancer connection for 2, 3 or 4 cell LiPo/LiFe rechargeable batteries allows you to 

match the voltage of all cells to one another. This prevents harmful deep discharge/overchar-

ging due to differing cell voltages.
Four LEDs display the balancer function depending on the connected rechargeable battery‘s 

cell count.