Cep Terminals 04100 GSM Remote Switch Control Module 04100 Data Sheet
Product codes
04100
3
1 Introduction
Thank you very much for purchasing our Telic STD35 telemetry device and optional Telic Camera!
We wish you success and joy in using your new STD35!
The STD35 offers the possibility to monitor an object or a room with the help of the optional Telic camera for the
STD35. You can retrieve an actual picture form the STD35 using any computer worldwide that is connected to
the internet (e.g. to check the weather conditions at your holiday home).
In addition a picture can be sent as an attachment to the preconfigured e-mail address in the case of an alarm.
This allows you to take further action if necessary (e.g. call the police if you see a burglar on the photo)
To be able to use this functionality you only have to connect the Telic camera to the camera plug on the STD35
(see picture 1).
After the software of the STD35 has recognized the camera the pictures can be viewed our sent via e-mail in the
following ways:
We wish you success and joy in using your new STD35!
The STD35 offers the possibility to monitor an object or a room with the help of the optional Telic camera for the
STD35. You can retrieve an actual picture form the STD35 using any computer worldwide that is connected to
the internet (e.g. to check the weather conditions at your holiday home).
In addition a picture can be sent as an attachment to the preconfigured e-mail address in the case of an alarm.
This allows you to take further action if necessary (e.g. call the police if you see a burglar on the photo)
To be able to use this functionality you only have to connect the Telic camera to the camera plug on the STD35
(see picture 1).
After the software of the STD35 has recognized the camera the pictures can be viewed our sent via e-mail in the
following ways:
-
Access of the web-browser through the internet and click on “Photo”-Page
-
E-mail with JPEG attachment in alarm situation
-
E-mail with JPEG attachment after incoming call
-
E-mail with JPEG attachment after SMS request
In case the light intensity is not enough at the survey area the infrared light of the camera will be activated
automatically. Please note that due to the infrared light there will be a loss of colours in the picture.
The Telic camera has an adjustable sun shade (metal plate over the camera). Please take into consideration
when adjusting the sun shade that the shadows are often changing during the day.
TIP: To make sure that all desired objects will be in the picture, that the sun shade is in a good position
and/or that the illumination of the room will lead to satisfactory picture we recommend to take “test
pictures” after the installation. Only then you can rely on the full functionality of the Telic camera.
pictures” after the installation. Only then you can rely on the full functionality of the Telic camera.
Concerning the user manual:
This document is meant to help you use the various functions of the device in the most optimal way possible.
Therefore we ask you to please read this manual carefully and completely.
The information in this document has been gathered after thorough investigation but should not to be taken as
assurance of end product properties.
The written approval of Telic GmbH is mandatory before you can pass on or reproduce this documentation for
this product or the software or use the content.
Telic reserves the right to change the data mentioned here without prior notice and does not take any
responsibility for technical inaccuracies and/or omissions. This manual has been thoroughly checked; should
you nevertheless find an error or want to express criticism or make suggestions, please send an e-mail to
E-mail: support@telic.de
Oberhaching, 16 Dec. 2010
© 2010 Telic GmbH, Oberhaching, Germany
This document is meant to help you use the various functions of the device in the most optimal way possible.
Therefore we ask you to please read this manual carefully and completely.
The information in this document has been gathered after thorough investigation but should not to be taken as
assurance of end product properties.
The written approval of Telic GmbH is mandatory before you can pass on or reproduce this documentation for
this product or the software or use the content.
Telic reserves the right to change the data mentioned here without prior notice and does not take any
responsibility for technical inaccuracies and/or omissions. This manual has been thoroughly checked; should
you nevertheless find an error or want to express criticism or make suggestions, please send an e-mail to
E-mail: support@telic.de
Oberhaching, 16 Dec. 2010
© 2010 Telic GmbH, Oberhaching, Germany